Sponsored

New LMR SVE SP2 Wheels (PP2 Replica)

teetoppz28

Walking on the dark side
Joined
Aug 22, 2014
Threads
4
Messages
85
Reaction score
75
Location
MI
Vehicle(s)
2018 Mustang GT 400a PP1
I noticed that on my stock wheels as well when I had the open-ended lug nuts installed. The difference is pretty significant, like at least 1/4" difference front to rear, but I guess you don't really see it if you're not looking for it.
Here are the fronts vs rear lug poke:

Front:
IMG_0241.jpeg

IMG_0243.jpeg


Rear:
IMG_0244.jpeg

IMG_0247.jpeg
Sponsored

 

Semp1

Well-Known Member
Joined
Apr 26, 2019
Threads
73
Messages
1,127
Reaction score
578
Location
Valhalla
Vehicle(s)
2018 Mustang GT PP1 Magneride
How did you guys get the center caps off. They seem pretty tight in there. I tried tapping them out from the rear with the end of a screwdriver with no success. I didn’t wanna go too hard. Just wanna know an easy way to do it.
 

teetoppz28

Walking on the dark side
Joined
Aug 22, 2014
Threads
4
Messages
85
Reaction score
75
Location
MI
Vehicle(s)
2018 Mustang GT 400a PP1
How did you guys get the center caps off. They seem pretty tight in there. I tried tapping them out from the rear with the end of a screwdriver with no success. I didn’t wanna go too hard. Just wanna know an easy way to do it.
I just pinched the tabs on the back of them and tapped them out with a screwdriver. They are pretty tight in there!
 

Semp1

Well-Known Member
Joined
Apr 26, 2019
Threads
73
Messages
1,127
Reaction score
578
Location
Valhalla
Vehicle(s)
2018 Mustang GT PP1 Magneride
I just pinched the tabs on the back of them and tapped them out with a screwdriver. They are pretty tight in there!
Disregard. I used two thumbs no screw driver and just pushed and they rocketed off. Super easy to remove. I was definitely babying. I literally am done already. Took 1 minute for all 4.
 

Semp1

Well-Known Member
Joined
Apr 26, 2019
Threads
73
Messages
1,127
Reaction score
578
Location
Valhalla
Vehicle(s)
2018 Mustang GT PP1 Magneride
Second question. Why don’t some of you guys like the lugs they came with. They’re tuner lugs. After speaking To sve they advised against using stock because they possibly scratch the wheels and are made for the slightly smaller lugs. I personally wouldn’t be using the chrome lugs no matter what just curious.
 

Sponsored

DonnieO

Well-Known Member
Joined
Jun 1, 2019
Threads
6
Messages
768
Reaction score
1,010
Location
29301
First Name
Donnie
Vehicle(s)
2017 mustang gt cs
I'm not sure how the lugs scratch the wheels... they go into the lug hole. My 21mm socket goes in just fine with stock lugs.
 

Semp1

Well-Known Member
Joined
Apr 26, 2019
Threads
73
Messages
1,127
Reaction score
578
Location
Valhalla
Vehicle(s)
2018 Mustang GT PP1 Magneride
I'm not sure how the lugs scratch the wheels... they go into the lug hole. My 21mm socket goes in just fine with stock lugs.
I’m assuming they are talking about the inner parts of the holes making contact with the lugs. Don’t know this is what LMR told me.
 

Semp1

Well-Known Member
Joined
Apr 26, 2019
Threads
73
Messages
1,127
Reaction score
578
Location
Valhalla
Vehicle(s)
2018 Mustang GT PP1 Magneride
These wheels look great. Even better with the GT350 center caps.
B5803BCE-943A-4F4E-9398-D511EC93C704.jpeg
 

Kermitz

Well-Known Member
Joined
Dec 22, 2018
Threads
32
Messages
771
Reaction score
808
Location
Vacaville CA
First Name
Seth
Vehicle(s)
2019 Mustang GT PP1 300A M6
Vehicle Showcase
1
These wheels look great. Even better with the GT350 center caps.
B5803BCE-943A-4F4E-9398-D511EC93C704.jpeg
[/QUOTE

I too like the way the GT350 caps look over the SVE and pony caps.
 
Last edited:

Sponsored

Semp1

Well-Known Member
Joined
Apr 26, 2019
Threads
73
Messages
1,127
Reaction score
578
Location
Valhalla
Vehicle(s)
2018 Mustang GT PP1 Magneride

Semp1

Well-Known Member
Joined
Apr 26, 2019
Threads
73
Messages
1,127
Reaction score
578
Location
Valhalla
Vehicle(s)
2018 Mustang GT PP1 Magneride
Because I don't want to run 10" on the front, nor 11" on the front with spacers and long studs.

I want a wheel with PP2 OE specs 19x10.5 OS24
You know PP2 in the rear is 19x11 though. So the specs won’t be accurate regardless if you do 10.5 square set up all around. So who really cares in the end. You’re already ahead of the game with 8lbs less a wheel than the PP2 wheel.
 

5hlucky

Member
Joined
May 7, 2019
Threads
3
Messages
23
Reaction score
3
Location
IL
Vehicle(s)
2017 S550
285 35r19 Firestone indy 500 Firehawk and
325 30r19 MPS4s

Probably not going to take these down the track. Waiting on slicks for my 17x9s


There's no noticeable negative effects so far.
How do you like the Indy500 for the rears?
Sponsored

 
 




Top