2019 Mustang spacers with PP1 and magnaride

[marc6795]

I saw a lot of forums but i'm not sure i saw a solution. Is it possible to add bolt on spacers of 25 mm if i have OEM wheel, PP1 and magnaride without cut studs ? Tks

Sponsored

 

[Modulom4]

yes that's what i have one mine. had to install cause of winter tires rubbing the rims with the Brembo caliper

 

[marc6795]

yes that's what i have one mine. had to install cause of winter tires rubbing the rims with the Brembo caliper

What brand did you bought

 

[Modulom4]

Eibach

 

[Modulom4]

Steeda for the front(3/4 inch) and Eibach in the back(1/4 inch) everything was done in a speed shop in Laval.

 

[marc6795]

Steeda for the front(3/4 inch) and Eibach in the back(1/4 inch) everything was done in a speed shop in Laval.

Bolt on or sandwich

 

[Schooley]

I have the 1” hub centric spacers all around from Coyote, plug and play

 

[1 old racer]

I have 23mm on the rears and 25mm on the front on mine with no problems. Note. If you ever take the car to the track the spacer MUST come off.

 

[Modulom4]

for the front it's bolt on and the back is sandwich.

Sponsored