ForYourOwnGood
Well-Known Member
- Joined
- Jun 28, 2016
- Threads
- 41
- Messages
- 1,397
- Reaction score
- 623
- Location
- Central MA
- Vehicle(s)
- 2017 Grabber Blue 5.0
I put my Corsa Touring axle back on today. Was pretty easy but I'm not really satisfied with the way the drivers side went on, there is a ton of pressure on it and it just seems misaligned. I measured four times before I cut with the catback off of the car to the exact 19.75" they specified but it seems like something is off.
It sounds good and doesn't rattle or vibrate the car though, so maybe I'm overthinking it, but the passenger side hangs loosely in the rubber hangers while the drivers side it wedged against them hard and doesn't budge even a tiny bit.
It sounds good and doesn't rattle or vibrate the car though, so maybe I'm overthinking it, but the passenger side hangs loosely in the rubber hangers while the drivers side it wedged against them hard and doesn't budge even a tiny bit.
Sponsored