Mishi Tube / K&N Filter / Pypes Mufflers / PBD E85 Tune: Dyno Results

[ingotgt]

This is great! I don't plan to run E85, but I'll definitely look into keeping the stock airbox now. Thanks for sharing with us!

Sponsored

 

[theman]

nice... someone was feeling like a nap on the line in that vid.

 

[Bill88stang]

Anyone have a pic of the modified air box?

 

[RomanB]

Disconnect tube from airbox, remove lid from box, rip out the carbon trap/filter.... that's it. I wouldn't touch anything else writhing the box. All those checkered squares within the lower box are there to reduce turbulence.

 

[Bill88stang]

I didn't think removing that carbon trap would do anything? Guess I was wrong

 

[TrevorGT]

That is a good run! That 1.5x 60 ft really helps with the et. Change that to the typical 2.1 to 2.5 like most "street" tires get and watch those times change to mid to high 12's.

Best mod here is the tires.

 

[BMR Tech]

Yes, the tires (slicks) make a huge difference.

The car on 20" wheels on all 4 corners (drag radials out back) and 93 Octane went [email protected]

DA on those passes wasn't that great. 2000~ if I recall correctly

 

[stage3s4]

nice run what tire setup are you running? Also do you have half shafts? Any worries about them breaking?

 

[Jay-rod427]

Yes, the tires (slicks) make a huge difference.

The car on 20" wheels on all 4 corners (drag radials out back) and 93 Octane went [email protected]

DA on those passes wasn't that great. 2000~ if I recall correctly

DA not great at 2,000' you poor thing. HAHA. The run you asked me about at beginning of thread when spinning all over was at 3,200 which was a good day for here.

 

[BMR Tech]

DA not great at 2,000' you poor thing. HAHA. The run you asked me about at beginning of thread when spinning all over was at 3,200 which was a good day for here.

3200...ouch!

We had a track day last weekend that was -170ish

 

[Bill88stang]

Does the mishi intake tube definitely make more power over the air aid intake tube? I have the air aid one and wondering if I’m leaving any power on the table for the mishimoto

 

[Eritas]

Chokes bad above 6,500RPM. Need a GT350 manifold!

 

[BMR Tech]

Does the mishi intake tube definitely make more power over the air aid intake tube? I have the air aid one and wondering if I’m leaving any power on the table for the mishimoto

Yes, the mishi tube in my testing absolutely made more power than the airraid tube...as did the stock tube. lol

Chokes bad above 6,500RPM. Need a GT350 manifold!

Yup!

Or better yet, a $350 2018 GT IM! :cheers:

Sponsored