So did we ever decide if there was a pulley replacement from ATI for the PC stage II?

[z06psi]

I heard there was a setup but never saw one or saw part numbers to complete a stage II swap.

Sponsored

 

[ColtonimusPrime]

I heard there was a setup but never saw one or saw part numbers to complete a stage II swap.

I assume you're talking about the crank pulley and damper?

If so, then yes there is. I talked to someone from ATI. Don't quote me as I've already deleted the email, but IIRC, they told me they do have a damper, but you also have to purchase their compatible 8 rib pulley. The one that comes with the stage 2 kit won't work on the new damper. So you have to purchase both.

 

[MyLilPony]

I ordered my PC stage 2 kit yesterday and they asked specifically if I had and ati damper. So I can confirm you need a different PC pulley to work with the ati.

 

[z06psi]

Is the ATI damper a different part number than the regular one we order from anyone else.

More specifically what are the two part numbers needed?

 

[MyLilPony]

Is the ATI damper a different part number than the regular one we order from anyone else.
Yes, that is what I understood


More specifically what are the two part numbers needed?Ill ask, as I am waiting to hear back form them on a kit change anyway

above

 

[beefcake]

the ati dampner is the same as the reg coyote

its the procharger pulley that is different

 

[z06psi]

the ati dampner is the same as the reg coyote

its the procharger pulley that is different

O.k. so the PC pulley bolts to the ATI. It is not two different ATI products.

Thanks Terry.

I tagged PCtech and I will see if they come back with a part number.

 

[beefcake]

O.k. so the PC pulley bolts to the ATI. It is not two different ATI products.

Thanks Terry.

I tagged PCtech and I will see if they come back with a part number.

correctamundo!!

 

[2qwk4ya]

When I ordered my stg 2 kit from procharger there were two pulley options. standard balancer pulley or Ati balancer pulley.

You need to source your own Balancer.

The pulley for the ATI balancer from procharger is.

Kit # 3FDR-002 this kit includes bolts washers and 8 rib pulley.


DC018-025 Pulley only.

The bolts that come with the ati balancer are to short to mount the pulley.


Order from your favorite Procharger vendor.

 

[StoplightWarrior]

crap, really? I just got my Procharger yesterday from Beefcake - today I called MMR and ordered oil pump & crank gears, head cooling mod, and Romac damper...are you saying that I need to alter the procharger kit to accomodate this damper? Or does the Romac one work??

It's this one that I bought - http://www.modularmotorsportsracing...page=product_info&cPath=26_27&products_id=416

 

[z06psi]

When I ordered my stg 2 kit from procharger there were two pulley options. standard balancer pulley or Ati balancer pulley.

You need to source your own Balancer.

The pulley for the ATI balancer from procharger is.

Kit # 3FDR-002 this kit includes bolts washers and 8 rib pulley.


DC018-025 Pulley only.

The bolts that come with the ati balancer are to short to mount the pulley.


Order from your favorite Procharger vendor.

Thanks so much. What was the cost on the PC 3FDR-002 kit? Or the pulley only DC018-025?

 

[2qwk4ya]

Thanks so much. What was the cost on the PC 3FDR-002 kit?

When I ordered my kit I specified the pulley for a ATI balancer. These numbers are off my build sheet. Price unknown






.

Sponsored