How to tie in fuel pressure sensor GT350?

[fosgateZ]

Waiting on my procharger kit to come in and doing all my research. I'd like to install a fuel pressure gauge as well as boost, unless that can be turned on with Forscan. I don't see a schrader valve anywhere on the rails. I do see Nitrous Express has an adapter but it doesn't show the GT350 as compatible. The fuel lines look the same on a 5.0 . I had found a post using this adapter with the 5.0 as shown in this post:

https://www.mustang6g.com/forums/threads/fuel-pressure-and-boost-gauge-install.23211/

Can anyone confirm the adapter will work or what you did to tie into the fuel system? I don't want to cut anything.

Thank you

Sponsored

 

[galaxy]

Aftermarket fuel rails. They have plenty of ports/options and look soo much better.

 

[fosgateZ]

Aftermarket fuel rails. They have plenty of ports/options and look soo much better.

Thanks those are beautiful but I'm tapping out on annual present to myself for "Surviving the Summer " working outside here in Phoenix . Fuel system will be next year. Lethal says they don't see why that adapter wouldn't work. Hoping someone else can chime in.

 

[Texas_Muscle5.2]

Are you talking about the fuel pressure sensor?

 

[K4fxd]

On a GT350 there should be a pressure sensor on the driver side fuel rail. Just get a y adapter and use that port.

Sponsored