BASE Stereo wiring

Adding a AC LC6i and I need the speaker color wiring at the back of the stereo for the Base 6 speaker stereo. All I can find is wiring charts for the factory amplified systems. Please help.

latemade5.8 said:

Adding a AC LC6i and I need the speaker color wiring at the back of the stereo for the Base 6 speaker stereo. All I can find is wiring charts for the factory amplified systems. Please help.

Click to expand...

Page 3. Compliments of [MENTION=17191]mindys[/MENTION]

http://www.revbase.com/BBBMotor/Wd/DownloadPdf?id=1124264

carcinoid said:

Page 3. Compliments of [MENTION=17191]mindys[/MENTION]

http://www.revbase.com/BBBMotor/Wd/DownloadPdf?id=1124264

Click to expand...

Thank You. Now where can I tap them without pulling dash?

my suggestion would be to open up the dash and use OEMRadio's "T" harness.
plug and play and no wire cutting.

there are a number of videos showing how to do it. Ive done it close to 10 times now.

finding another location will probably require cutting wires as I have not seen any connector info besides this available adapter at the radio for the base radio. There are other connectors for the amped radio at the amp, but that doesnt help your case of course.


Ramb