TVS Recipes

I'm shooting for 15 psi at the end of all this
I'm expecting to lose 3 psi or so with the ported head
Hence the reason for the overdrive ati dampner

I'll repully the head unit once I determine what the current psi is at

The car will also be running the id1000 and tuned/retuned by Travis at boost works

You won't loose power. Boost is resistance

Phase 1 here and still just like it came new
SP longtubes, Corsa catback, racestars, Lund tune 93 w/ VP
[email protected]

NicksRubyRed15GT said:

Phase 1 here and still just like it came new
SP longtubes, Corsa catback, racestars, Lund tune 93 w/ VP
[email protected]

Click to expand...

thats impressive for a phase 1 with full exhaust/tune and tires hope i can get there

NicksRubyRed15GT said:

Phase 1 here and still just like it came new
SP longtubes, Corsa catback, racestars, Lund tune 93 w/ VP
[email protected]

Click to expand...

Very impressive indeed. I saw his in the other thread.
TVS putting in work!

Phase 2 standard set up
Ford racing xpipe
Roush Axle backs
PBD filter


Upcoming-
MAK cat delete pipes
OPG/Crank sprocket
UPR catch can
Swap from 3.73 to 3.15 rear
Ngauge with Lund tune

Looking for 680 to the wheels.

I had the 79mm
Bap
Vmp twin throttle body
Id1000s
Longtubes with corsa catback and made 700rwhp 523trq. On pump

[MENTION=21434]Doctor Fishtail[/MENTION]
heard you have a 800hp Roush TVS?

Bahndvr said:

[MENTION=21434]Doctor Fishtail[/MENTION]
heard you have a 800hp Roush TVS?

Click to expand...

Yes sir.

Bahndvr said:

[MENTION=21434]Doctor Fishtail[/MENTION]
heard you have a 800hp Roush TVS?

Click to expand...

1. Roush Blower
2. long tube stainless power headers
3. E85
4. Fore Innovations fuel system
5. GT 500 throttle body
6. VMP Triple Pass heat exchanger (loud ass fans)
7. VMP 72mm pulley combined with Hasty Idler pulley kit
8. ID 1000s
9. OPG/TG
10. ATI Super Damper
11. 3:31 gears
12. LUND TUNING (Best E-Tuning service I have ever had and that is saying a lot)
13. NGK plugs
14.K2 filter
15. I am sure there are 1 or 2 things I am forgetting

[MENTION=15813]Dntalman[/MENTION]
Heard you are running a Roush, can you give your recipe?

No problem.
Lund Tuned
646/598 at the wheels

Roush TVS
VMP 79MM pulley
VMP Twin 67mm TB
VMP triple pass heat exchanger with dual fans
VMP boost a pump
ID1000 Injectors
Stainless Works 1"7/8" full length headers
SW 3" H-pipe
SW 3" Catback
1 piece driveshaft
Factory 3.55 gears
A6 auto

Angry50 said:

thats impressive for a phase 1 with full exhaust/tune and tires hope i can get there

Click to expand...

make that a 10.42@135 as of last Sunday. BTW the car made 669/506 before putting the longtubes on and all with that big 85mm pulley

Mines a holman moody G2 (essentially a Roush Phase 2) with Roush Active exhaust, Ford Performance X pipe. Im guessing Im putting down the advertised 727hp, possibly a little more with that exhaust. Havent had it on a dyno but it seems as fast as my suzuki!

hmperf said:

Mines a holman moody G2 (essentially a Roush Phase 2) with Roush Active exhaust, Ford Performance X pipe. Im guessing Im putting down the advertised 727hp, possibly a little more with that exhaust. Havent had it on a dyno but it seems as fast as my suzuki!

Click to expand...

Do you by chance have a video of your car? Really want to hear the exhaust..