AS-BUILT Factory Settings Reset

I was wondering if there was any way to revert settings to factory settings. The laptop I had my AS-BUILT files on crashed and now I'm looking to revert some settings, can't find much info on it on the web tho.

The settings I'm looking to revert are in the ACM 727-01-01, and 727-01-02..

I'm not sure how you could do a reset but if you know what you changed, maybe we can just figure out what values to change back?

jbailer said:

I'm not sure how you could do a reset but if you know what you changed, maybe we can just figure out what values to change back?

Click to expand...

Currently the 727-01-02 is at 0088 B9, which is what I changed it to in order to get rid of the ANC, wondering what the factory settings were for that.

Also, my 727-01-01 is 1850 F000 44CA, not sure what it was set at from factory and I'm trying to troubleshoot some audio issues in conjunction to my aftermarket amps.

My values for both of those haven't been changed (still factory) but my car is an EB Premium 201A, not sure if that will be the same. My values are:

727-01-01 1050 FA00 44CE
727-01-02 0388 BC

I'm hoping Ford doesn't change the Motorcraft Service site too much. You can almost always find what you need there...

https://www.motorcraftservice.com/asbuilt

The first time you go to that link you will be asked for a location. Enter a location then go to the link a second time to get to a page you can enter your VIN and get your original as-built data.

TexasRebel said:

I'm hoping Ford doesn't change the Motorcraft Service site too much. You can almost always find what you need there...

https://www.motorcraftservice.com/asbuilt

The first time you go to that link you will be asked for a location. Enter a location then go to the link a second time to get to a page you can enter your VIN and get your original as-built data.

Click to expand...

I wish I could thank this post 1 million times over. :clap2:
Exactly what I needed:

727-01-01 1850 FA00 44D6 727-01-02 0288 BB

As Built

Relak said:

I was wondering if there was any way to revert settings to factory settings. The laptop I had my AS-BUILT files on crashed and now I'm looking to revert some settings, can't find much info on it on the web tho.

The settings I'm looking to revert are in the ACM 727-01-01, and 727-01-02..

Click to expand...

I would recommend saving any original settings. You can upload to Google Docs (as a sheet or?) and have access from most anywhere. You can always save a paper copy too.