New Tikore 6AL4V Titanium Lug Nuts for GT350 and GT350R

Just snagged a set of these from Tikore. Beautiful satin finish. Designed specifically for our cars. I got them from Charlie Fallon at Tikore.com.

Nice. I think ZL1 Addons is making some as well.

Never heard of Tikore but will definitely check into them.

Do you have any metal specs?

It's Grade 5 Ti. 6AL4V. Tikore is highly respected in the Titanium world.

Unreal. Thank you!

How do these work on the R wheels?

Never mind I see the open lug!

If I'm not mistaken there's no difference in lugs between the non-R or R. If you use the lugs on the CF wheels it should work.

Any prices?

DrumReaper said:

Any prices?

Click to expand...

Just checked their website, no Ford lug nuts under $600 :eyebulge: from what i can see. I'll pass thank you.

montreal ponies said:

Just checked their website, no Ford lug nuts under $600 :eyebulge: from what i can see. I'll pass thank you.

Click to expand...

Reach out to them. They will work a good price for you.

DrumReaper said:

If I'm not mistaken there's no difference in lugs between the non-R or R. If you use the lugs on the CF wheels it should work.

Click to expand...

Hmmm...I didn't know I could use a closed lug on these wheels.

I'll give these guys a call.

i thought the front studs on the R were longer... perhaps thats why they have a set of open lugs

dron_jones said:

i thought the front studs on the R were longer... perhaps thats why they have a set of open lugs

Click to expand...

I believe you are right Sir. I'll report back my findings.

dron_jones said:

i thought the front studs on the R were longer... perhaps thats why they have a set of open lugs

Click to expand...

Studs are longer on the front but the CF wheels have a thicker center section up front. The lugs are the same size as evidenced by their interchangeability between front and rear.

Not sure why anybody would spend $600+ when these are available for less than a third of that:

https://ozmoengineering.com/product/m14x1-5-conical-lugnuts/