Rotor Min Thickness for Replacement

Anyone have access to the rotor thickness value when Ford recommends replacing the brake rotors? Didn't see anything in the Supplement.

No cracks in mine, 6800 miles and (4) track days. I'll be getting new pads but believe I can get more life from the rotors.

Says it on the aluminum hub.

At 18K miles I am getting ready to touch up and grind my rotors. I built a setup to precision grind motorcycle rotors a few years back and it should work great on the GT350 rotors for putting a fresh face on them. Looking to reduce the squealing, it’s getting bad at low speeds.

34mm front, 24mm rear

xXANCHORMONXx said:

Says it on the aluminum hub.

Click to expand...

That's cool, never noticed even though I've switched wheels 4 times already.

TDC said:

That's cool, never noticed even though I've switched wheels 4 times already.

Click to expand...

I have 36 what do you have

firestarter2 said:

I have 36 what do you have

Click to expand...

35.8mm front.

Since last report ^^^ and after 4 track days + an additional 1500 miles rotor thickness only dropped 0.1mm. Wear is pretty good on these. As long as cracks don't start to form then it should be awhile before they need replacing.