The Official 285/325-19 Thread

If you're running a 285 front, 325 rear combo on 19" wheels, please post up pics. Considering going to that setup but paranoid about the looks of the slightly shorter rear tire versus the stock PP tire height.

TIA.

Bueller?

Come on, I know there are several folks out there running this tire combo....

what sidewall are u planning on running?

not a 325 rear but i'm running a 285 35 19 which is 3% shorter than 275 40 19 and it looks fine. id go for 285 35 19 front and 325 30 19

DSC_0007 by Jae Choi, on Flickr

325/30-19 was the plan with a 285/35-19 on the front.

Here is mine with 285/35/19 & 325/30/19 and CJPP Springs.
When my rears are done im going with 305/35/19 to fill in the gap a little more.

i have 275/35/19 and 325/30/19 MPS4S. i will get pics later. but you should do it either way lol

Brotha that fitment works like a charm no issues, [MENTION=11389]Strokerswild[/MENTION]

Even done 305/345 setups before so the 285/325 is butter all day everyday with a side of bread.

Yeah, it's that extra tiny bit of wheel gap that freaks me out (I'm on BMR SP080s)....

The rest is all good....

[MENTION=11389]Strokerswild[/MENTION] keep in mind my gap is also a little bigger in the rear because my CJPP springs lower the front 1.5 vs the 1 inch drop in the rear.
Whats the drop on the SP080s?

Less than an inch rear, plus I'm running the cradle lockout which lessens the drop a hair more.

I lowered a buddy's GT/CS on the same springs and his seems more slammed than mine....

Here is mine on 285/35's and 325/30's on MRR M350 19x10's&11's 5mm spacer up front. I originally had 275/35's on the front but the 285's definitely fit the wheels better. There was a slight stretched look to the 275's on the 10" wheels.

[MENTION=18894]zuki_dan[/MENTION], what springs are you on?

I think its BMR springs

Paul@PKAUTODESIGN said:

I think its BMR springs

Click to expand...

Yessir, when in doubt I should read the sig....derp.

Strokerswild said:

[MENTION=18894]zuki_dan[/MENTION], what springs are you on?

Click to expand...

Yes BMR Min drop springs SP089 up front because of the Whipple and BMR SP082 rear springs.