IF YOU WANT A QUALITY SPARE PLEASE LOOK HERE!

DrumReaper said:

I get what you're saying. The manufacturer who I have asked if he could do it will be researching the concept. I think he knows more about this than either of us so I am deferring to his research and plan.

If he says it has to be 4, 5, 6 or whatever inches wide, I will believe him.

Scissor jacks will fit in a 4" deep wheel.

Click to expand...

ridenfish39 said:

Us lowly GT owners with the PP would be interested as well

Click to expand...

Bob Loblah said:

Interested.
Edit: Sorry, not interested. I've re-read the title and changed my mind. I want a spare that fits over the caliper, fits in the wheel well, holds air, and gets me down the road to the service station. Poor quality is fine with me If it meets those minimum requirements. I don't need a flow formed/forged wheel for emergency use.

Click to expand...

ThreeFiveO said:

Good luck finding a flush fit in the trunk with a wheel that will clear the calipers and accommodate a jack as well. There's not a lot of room under there.

Click to expand...

DrumReaper said:

@Need4SpeedMotors may be able to make a quality spare for us, but he would need at least 100 orders.

What I am proposing is the R-style wheel he has in 19x4 or 19x5, whichever may be able to fit the trunk well and for flush.

If you are in, please state your desire for one in this thread.

***DISCLAIMER***
This idea is just that at this point...
This post is not meant for discussion of opinions, but rather if you want a spare or not. I'm going to leave the wheel dynamics up to the expert being asked to make the wheel. He will have to research the idea to see if it will work first. But if you are interested, please note that here. Thanks!

Click to expand...