No AC after Paxton install?

No AC after Paxton install. The belt is routed properly. When I push the button I don't even here anything click on. Any suggestions?

The AC has its own smaller belt is it on there?

Did you unplug the sensor on the AC line close to where the upper radiator hose is?

I have accidentally left this unplugged after draining my oil catch can and it disables the AC system.

Check the connector just to the passenger side of the radiator up front.

zuki_dan said:

Did you unplug the sensor on the AC line close to where the upper radiator hose is?

I have accidentally left this unplugged after draining my oil catch can and it disables the AC system.

Click to expand...

Posted at the same time lol. I did the same thing with my UPR install.

I will check that today. Thanks guys!!

spitfirecwp said:

I will check that today. Thanks guys!!

Click to expand...

You get it worked out?

I still don't have AC. It's mind boggling to me that it would just stop working. The AC pump can't just have went bad like that. Any other recommendations?

spitfirecwp said:

I still don't have AC. It's mind boggling to me that it would just stop working. The AC pump can't just have went bad like that. Any other recommendations?

Click to expand...

it's possible you punctured something and lost all your coolant? one would have though you heard it leaking out though.

or you left something unplugged

U didnt somehow knock the connector for the ac compressor off when putting the belt on.Ive seen guys use screw drivers and prybars tryin to get that belt on.

zuki_dan said:

Did you unplug the sensor on the AC line close to where the upper radiator hose is?

I have accidentally left this unplugged after draining my oil catch can and it disables the AC system.

Click to expand...

Did you look at this? Exactly what it sounds like.

jhatley7 said:

Did you look at this? Exactly what it sounds like.

Click to expand...

I know the piping off the blower flute sits very close to the AC line connector. possible that you broke the connector or unplugged it when fitting that pipe.

I know my pipe off the blower is like a few mm from that connection.

Thanks fellas. As soon as I get the opportunity I will check all that was mentioned and let you know.