Boost Works GT350 and GT 6" intercooler core install/testing!

Tapered tank promotes flow.

4 gear pull at 81 degrees ambient resulted in a 114 degree temp when lifting. This was at 15-16psi. Far better than the 150 degree temps we were seeing before at just 12psi.

4.5" core testing starts this week on a GT.

Travis@boostworks said:

4 gear pull at 81 degrees ambient resulted in a 114 degree temp when lifting. This was at 15-16psi. Far better than the 150 degree temps we were seeing before at just 12psi.

4.5" core testing starts this week on a GT.

Click to expand...

So that was a 4th gear test hit or a 4 multi gear test hit? Just wanna clarity since there’s going to be a big difference in iats between the two.

Would really like to see quarter mile testing since that would most accurately show what the cores will endure.

That's a 1st through 4th pull.

Travis@boostworks said:

4 gear pull at 81 degrees ambient resulted in a 114 degree temp when lifting. This was at 15-16psi. Far better than the 150 degree temps we were seeing before at just 12psi.

4.5" core testing starts this week on a GT.

Click to expand...

So what this with the 6" or 4.5" on the GT350?

TItle states it is the 6”.

08StangGT_CS said:

TItle states it is the 6”.

Click to expand...

My bad I overlooked that