Ffr8dawg
Member
- Joined
- Oct 10, 2017
- Threads
- 2
- Messages
- 10
- Reaction score
- 2
- Location
- Spokanistan WA
- Vehicle(s)
- 2017 GT350. Grabber Blue. White stripes.
- Thread starter
- #1
Hey guys, long time reader, first time poster. So much great info on here, never felt the need to post!
Anyway, Having some issues with installing a JLT cai on my Gt350.
First, no matter how I adjust it, the filter is pushed up against the drivers side of the airbox. Its not too bad, but this annoys me.
Next is the vacuum line attachment. The nipple on the JLT is attatched with a section of hose that is too long. This binds up and puts unwanted tension in the vacuum lines. Not impressed. See image below for what Im reffering to regarding the length of the vacuum connection. You can see the vacuum line next to the much too long connection on the JLT. Any advise with getting this ibtake installed properly would be appreciated! Thanks!
Anyway, Having some issues with installing a JLT cai on my Gt350.
First, no matter how I adjust it, the filter is pushed up against the drivers side of the airbox. Its not too bad, but this annoys me.
Next is the vacuum line attachment. The nipple on the JLT is attatched with a section of hose that is too long. This binds up and puts unwanted tension in the vacuum lines. Not impressed. See image below for what Im reffering to regarding the length of the vacuum connection. You can see the vacuum line next to the much too long connection on the JLT. Any advise with getting this ibtake installed properly would be appreciated! Thanks!
Sponsored