I want to deprogram my rear speakers' EQ

GTP · May 1, 2017

[MENTION=20927]OEMRadio[/MENTION] is not responding to a request to buy his programmer. (I could be doing it wrong.)

Does anyone have one to sell, or would loan me theirs long enough for me to flash once?

http://www.mustang6g.com/forums/showthread.php?p=1838742

mgrey · May 1, 2017

Purchase your own programmer for $30 and use FORScan

GTP said:
OEMradio is not responding to a request to buy his programmer. (I could be doing it wrong.)

Does anyone have one to sell, or would loan me theirs long enough for me to flash once?

http://www.mustang6g.com/forums/showthread.php?p=1838742

Just buy a cheap ELM programmer for around $30 and use FORScan

https://www.amazon.com/dp/B01F0GVBW...TF8&colid=35EA715UDBDCK&coliid=I21KEMZOXR75C7

GTP · May 1, 2017

Will I have to read that entire thread on Forscan? :lol:

Quackfoo · May 2, 2017

Yeah that thread is a bitch, it'd be nice if someone in the know made a new one with just the forscan information.

Keith_PDX · May 2, 2017

I was unable to find specifically how to do it in that thread.

Please take the extra time and supply a specific link with the actual Forscan block and hex information.

Boggus · May 2, 2017

Would love to know this also

Spart · May 3, 2017

Check this post: http://www.mustang6g.com/forums/showpost.php?p=1745122&postcount=1299

It is well worth your time to scan through that thread. I know it's large and daunting, but there are lots of cool things you can change with as-built.

Keith_PDX · May 3, 2017

Spart said:
Check this post: http://www.mustang6g.com/forums/showpost.php?p=1745122&postcount=1299

It is well worth your time to scan through that thread. I know it's large and daunting, but there are lots of cool things you can change with as-built.

I have. That post is for making it a low level output versus high level. The question is pertaining to making the rears full range or removing the OEM EQ that is applied to that signal.

HISSMAN · May 3, 2017

Didn't know this was even possible, I have everything to do the Forscan tweaks, but I am too lazy to read the how to.

Spart · May 3, 2017

If you just want full-range non-EQ'd output, I think you'd only want to change 727-01-02.

For more detail on ACM changes, see the F150 spreadsheet: https://docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/edit#gid=338817466

Keith_PDX · May 3, 2017

Spart said:
If you just want full-range non-EQ'd output, I think you'd only want to change 727-01-02.

For more detail on ACM changes, see the F150 spreadsheet: https://docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/edit#gid=338817466

You sir are brilliant! Thanks. I will look into that. This is the first actual data I have seen that addresses this particular desire.

Boggus · May 3, 2017

That's for the rears only?

Spart · May 4, 2017

Boggus said:
That's for the rears only?

AFAIK, the factory EQ/DSP is all or nothing. It's not changeable on a per-speaker basis.

SWallace · May 18, 2017

Did you ever get the full string for this? I see 727-01-02 in the spreadsheet but can't make heads or tails out of the other values. Not sure if I should be setting an EQ value or one of the others. Is 0 off?

Spart · May 18, 2017

SWallace said:
Did you ever get the full string for this? I see 727-01-02 in the spreadsheet but can't make heads or tails out of the other values. Not sure if I should be setting an EQ value or one of the others. Is 0 off?

What are you trying to do?

I want to deprogram my rear speakers' EQ

GTP

Deutsche Pony

mgrey

Active Member

GTP

Deutsche Pony

Quackfoo

Well-Known Member

Keith_PDX

Well-Known Member

Boggus

Well-Known Member

Spart

Well-Known Member

Keith_PDX

Well-Known Member

HISSMAN

Large Member

Spart

Well-Known Member

Keith_PDX

Well-Known Member

Boggus

Well-Known Member

Spart

Well-Known Member

SWallace

Active Member

Spart

Well-Known Member