Vinyl Number Plate

Anyone using a vinyl stick on front number plate? Will the normal number plate dimensions fit if I get one made up? I've got normal plates stuck on at the moment, but can't remember whether they fit exactly?

mines vinyl the letters are standard sizing but the white around them has had to be trimmed every so slightly smaller than it probably should be (though not massively) to make it fit perfectly on the flat part of the front bar of the bumper without going over the lip

Cheers, and is your front plate reflective?

Mine is Vinyl. Stuck it straight on and just wrapped in around the bumper a bit, its legal size etc.

yeah its fully reflective

Mines a stuck on one.....got it from here

Give him a ring and he'll make it exactly how you want

http://www.1st4stickers.com/mini-vi...ctive-show-plate-only-300mm--x-70mm-398-p.asp

Thanks, did see that site but they were only advertising a 3/4 size plate and as the spacing on mine isn't exactly legal I thought it best to not draw too much attention!

Enoch said:

Click to expand...

That's got to be one of the best pics ever of your car, and certainly of a Guard... that stance is just kicking and the 6GR's just look so good !

Nookie said:

That's got to be one of the best pics ever of your car, and certainly of a Guard... that stance is just kicking and the 6GR's just look so good !

Click to expand...

And that rear-facing roof-mounted propeller must add a good few mph to the top end...

markleigh said:

And that rear-facing roof-mounted propeller must add a good few mph to the top end...

Click to expand...

:lol:
Ever the engineer is Andy... ;)

So, ordered it a cm smaller in height than normal plate so will have a go at sticking it on. I have bad memories of trying to apply stripes to my RX8, but this should be simples....