Ingot Silver Transformation

This is my fifth GT. I parted with my black '07 that had 170,000 miles. I always personalize them to make them my own. Over the last 3 weeks I have installed window tint (20% rear, 35% front), BMR SP080 springs, Koni adjustable shocks and struts, wheel spacers (25mm front/23mm rear), PMAS CAI w/Lund tune, UPR catch can, 170 deg thermostat, BMR CB005 cradle lockout, BMR CB006 chassis brace, ZL1 splash guards, Diode Dynamics interior lights, MBRP Street cat back (black) with MBRP R1013 resonators, Scott Drake Hood vents, White Madnesss Garage shift knob, Redline goods manual shifter boot and ebrake boot, paddle shifter extensions, Scott Drake dead pedal.

Generic Ingot Silver GT

Here is how she stands now.
MBRP cat back with resonators
Springs and shocks
CB005
wheel spacer
Intake

Exterior and Stance

Sweet looking ride, bud. Nicely done - not that you're done...

So true. Today I will be installing Anchor Room tint on all the lights except the headlights. I will also install their front and rear quarter panel protection film and their clear headlight protection film. Then I am done

Is that the MBRP Race or Street? My street never came with the brace part in between the H-pipe section...

EDIT*** I see you have the street as well... I wonder why mine never came that way...

Congrats on choosing the best color

All the cool kids get ingot. Lol

B4RK3R said:

Is that the MBRP Race or Street? My street never came with the brace part in between the H-pipe section...

EDIT*** I see you have the street as well... I wonder why mine never came that way...

Click to expand...

I have the Street MBRP as well and it has the brace....

Looks pretty sweet! How are those spacers doing? Any issues? I have the foundry 20" as well. I'm thinking I'd like just a slightly lower stance. I don't like it to sit on the tires basically. I like the height yours is, but don't want to do anything but springs.

Rangore,
The spacers are working very well. No issues with balance or rubbing. If you want a lower stance, then do springs. I am lowered on BMR springs. Spacers address the wheel offset relative to the wheel arch. I have 25mm spaces on the front and 23mm spacers on the rear.

Yeah. Thinking of both springs and spacers. I'd like the foundry wheels a touch further out. I also want it lower, but don't want it to look like it's sitting on the tires. Starting to research what's out there.

Nice ride. Good color choice. Where did you get your wheel spacers? Mainly the 23mm ones. Did you have to trim the wheel studs down at all to allow the 23mm ones to fit?

[MENTION=20724]highvoltage[/MENTION],
This is where I got the spacers http://www.motorsport-tech.com/wheel_adapters_pop_car_d3
I did not have to trim the studs.

Thanks for the info!