What did you do to your S550 Mustang today?!

Installed Metco fuel rails and Fore fuel line adapter, then removed silver paint on boss manifold might paint it in the future

Kahboom said:

Installed Metco fuel rails and Fore fuel line adapter, then removed silver paint on boss manifold might paint it in the future

Click to expand...

Nice, how do you like the Airaid CAI, I've been thinking about going that route.

GT Pony said:

The clear coat must be pretty thick on these cars to take all that without burning through. Looking forward to photos.

Click to expand...

Well it does have high spots. Hence the orange peel.

z06psi said:

Well it does have high spots. Hence the orange peel.

Click to expand...

We are visiting Waikiki from Australia around 11th Nov - love to see the finished product - or are there any local owners meeting around that time?

I like the Airaid intake, with an insert in side the intake it's not too much different than stock, it's definitely worth it to have it removed the insert inside and then get it tuned.

Installed bmr jacking rails and washed it. Rails went on quick and easy

Bought my mustang a friend today.

A 2006 Infiniti G35X AWD. Using it for commuting a few days a week to save the mileage on my mustang, and will be using the AWD in the snow. I've done 23k miles on my mustang in 6 months and that's scary lol, this should help fix that and be much more pleasant to drive in traffic.

That is a great DD. [MENTION=20644]ahl395[/MENTION]

bjstang said:

I don't think [MENTION=16585]Warhead[/MENTION] saw the post. Here's the link, http://stickyzombie.com/product/color-windshield-logo-backing-oval

Click to expand...

Thanks

Moved the tuner off of the windshield and on to a mount.

Found this on Amazon - https://www.amazon.com/gp/product/B00F3F09NU/

Was hoping I could just swap out the pivot joint but they were different sizes, so I just cut off one of the studs on the mount and trimmed the other one down length wise. Fortunately, it had the rectangle studs I've seen lately and fit after trimming.

Loosened the bolt on the passenger front seat and mounted it to that (had to run to a friends house for the proper bit).

Better - was on the windshield top left driver side - now it's not directly in my line sight.

lsiunsuex said:

Moved the tuner off of the windshield and on to a mount.

Found this on Amazon - https://www.amazon.com/gp/product/B00F3F09NU/

Was hoping I could just swap out the pivot joint but they were different sizes, so I just cut off one of the studs on the mount and trimmed the other one down length wise. Fortunately, it had the rectangle studs I've seen lately and fit after trimming.

Loosened the bolt on the passenger front seat and mounted it to that (had to run to a friends house for the proper bit).

Better - was on the windshield top left driver side - now it's not directly in my line sight.

Click to expand...

Professional looking job.

G2 caliper paint

Ruby red matched G2 caliper paint. Removed all 4 calipers, cleaned and masked, then used Preval aerosol sprayer. Finished with high heat decals and 3 coats of VHT clear. I love the look. I overmasked the rears a little but, but can't tell unless I crouch down and look closely.

Ruby15GT said:

Ruby red matched G2 caliper paint. Removed all 4 calipers, cleaned and masked, then used Preval aerosol sprayer. Finished with high heat decals and 3 coats of VHT clear. I love the look. I overmasked the rears a little but, but can't tell unless I crouch down and look closely.

Click to expand...

Nice job, I’m peanut butter & jelly

Ordered a H-Pipe. I have a X-Pipe currently with Roush exhaust and its gotten a bit to raspy for me. Hoping the H-Pipe works.

Ruby15GT said:

Ruby red matched G2 caliper paint. Removed all 4 calipers, cleaned and masked, then used Preval aerosol sprayer. Finished with high heat decals and 3 coats of VHT clear. I love the look. I overmasked the rears a little but, but can't tell unless I crouch down and look closely.

Click to expand...

Great job! Looks good!