Anyone here running 285/295's in the front?

If anyone here is running 295(or 285)/30/19 or 295(or 285)/35/19 tires in the front, please post a picture and your alignment specs!! It would be totally awesome for my next wheel purchase

People are running 285 in 19s up front just fine. That's what I plan on running once my wheels get here, I may eventually run the 295s just not sure I wanna spend the extra money on them

285s up front on a 10" wheel
305s in back on a 11.5" wheel

What offsets front and rear will push the wheel in as far as possible without rubbing?

Could you fit a 305x20x11.5+50 in the back?
How about a 285x20x10+40 up front?

Both of those will be out 10mm vs stock, I don't like the sticking out look....just not sure how much room inside we have.

I have 285 35 20 on a 20x10 up front with wide Toyo r888 lowered and no rub

My offset is more aggressive than 40 so you should be golden

So from as far as i know, a 285 will work. What about a 295, or is there not enough strut clearance for that.

My next tires will be square 285's on 19x9.5.

really depends on the offset of your wheels man. What's your offset?

Quiksilver15 said:

really depends on the offset of your wheels man. What's your offset?

Click to expand...

19x10 40mm offset

derieuz said:

If anyone here is running 295(or 285)/30/19 or 295(or 285)/35/19 tires in the front, please post a picture and your alignment specs!! It would be totally awesome for my next wheel purchase

Click to expand...

285/35r19 all around, 19.5 wide wheel +30 offset lowered

Varekai said:

285/35r19 all around, 19.5 wide wheel +30 offset lowered

Click to expand...

any pics down the side? if you put a straightedge from the top of the fender to the centercap of the wheel does it hang straight down or where does it touch the rear wheel?

Love the VP5. I have the 20's on my BMW



;) note the prototype M350s on the Mustang

Toyo R888 285/35/20 on 20x10 and 20x11 315/30/20 lowered on Pro Kit

Paul at N4S can set up the perfect offsets. No rubbing here

Higgs Boson said:

any pics down the side? if you put a straightedge from the top of the fender to the centercap of the wheel does it hang straight down or where does it touch the rear wheel?

Click to expand...

Here's the best I could get, I can try again when it's light out tomorrow I can have someone hold my level for me.

MELLOWYELLOW06 said:

Love the VP5. I have the 20's on my BMW
;) note the prototype M350s on the Mustang

Click to expand...

Looks great! These wheels are amazing on a black car.

Varekai said:

Here's the best I could get, I can try again when it's light out tomorrow I can have someone hold my level for me.

Click to expand...

you da man, thank you!!