VelossaTech
Well-Known Member
- Joined
- Nov 6, 2015
- Threads
- 30
- Messages
- 379
- Reaction score
- 244
- Location
- Florida
- Website
- www.velossatechdesign.com
- First Name
- Dan
- Vehicle(s)
- Ford Focus ST
- Thread starter
- #1
Hello everyone,
With Shawns jaw dropping mod to our dual BIG MOUTH setup and some deliberation, we decided to pursue an LED lit version of our big mouths.
The overall product architecture will be the same, except the lit versions will have pre mounted LEDs.
The LED colors will be the color of YOUR CHOICE as well as the BIG MOUTH, color of choice (they can be different colors!).
I can only imagine what this will look like, my mind is racing with ideas. White big mouths, red LEDs? Green big mouths, green LEDs?
The customization will be endless.
I would like to offer the kit as a DIY with as much support as possible but also at a reasonable price. Looking to price the kit with a single big mouth + LEDs at around the 150-160 mark, and the dual kit at around the 300 mark.
It will most likely be set up to wire directly into the headlight, or maybe we can add a switchable option for a slightly higher cost.
Here is Shawns car for example.
If you didnt know what a BIG MOUTH was, it is actually a performance oriented ram duct that channels high speed air to your airbox with very little interrupted turbulence and drastically helps your inlet temps, throttle response and gives a small boost in lbm/min.
Here is a quick breakdown.
The passenger side big mouth is for aesthetics only, there was demand for it so we made it happen (thanks to Shawn ) It seems a lot of people want the LED versions too, give us some input and we can make it happen!
:amen:
With Shawns jaw dropping mod to our dual BIG MOUTH setup and some deliberation, we decided to pursue an LED lit version of our big mouths.
The overall product architecture will be the same, except the lit versions will have pre mounted LEDs.
The LED colors will be the color of YOUR CHOICE as well as the BIG MOUTH, color of choice (they can be different colors!).
I can only imagine what this will look like, my mind is racing with ideas. White big mouths, red LEDs? Green big mouths, green LEDs?
The customization will be endless.
I would like to offer the kit as a DIY with as much support as possible but also at a reasonable price. Looking to price the kit with a single big mouth + LEDs at around the 150-160 mark, and the dual kit at around the 300 mark.
It will most likely be set up to wire directly into the headlight, or maybe we can add a switchable option for a slightly higher cost.
Here is Shawns car for example.
If you didnt know what a BIG MOUTH was, it is actually a performance oriented ram duct that channels high speed air to your airbox with very little interrupted turbulence and drastically helps your inlet temps, throttle response and gives a small boost in lbm/min.
Here is a quick breakdown.
The passenger side big mouth is for aesthetics only, there was demand for it so we made it happen (thanks to Shawn ) It seems a lot of people want the LED versions too, give us some input and we can make it happen!
:amen:
Sponsored