DrumReaper
Well-Known Member
- Joined
- May 17, 2015
- Threads
- 114
- Messages
- 4,985
- Reaction score
- 3,706
- Location
- South East
- Vehicle(s)
- 1971 429CJ Mach 1, 2012 Boss 302
- Thread starter
- #1
@Need4SpeedMotors may be able to make a quality spare for us, but he would need at least 100 orders.
What I am proposing is the R-style wheel he has in 19x4 or 19x5, whichever may be able to fit the trunk well and for flush.
If you are in, please state your desire for one in this thread.
***DISCLAIMER***
This idea is just that at this point...
This post is not meant for discussion of opinions, but rather if you want a spare or not. I'm going to leave the wheel dynamics up to the expert being asked to make the wheel. He will have to research the idea to see if it will work first. But if you are interested, please note that here. Thanks!
What I am proposing is the R-style wheel he has in 19x4 or 19x5, whichever may be able to fit the trunk well and for flush.
If you are in, please state your desire for one in this thread.
***DISCLAIMER***
This idea is just that at this point...
This post is not meant for discussion of opinions, but rather if you want a spare or not. I'm going to leave the wheel dynamics up to the expert being asked to make the wheel. He will have to research the idea to see if it will work first. But if you are interested, please note that here. Thanks!
Sponsored
Last edited: