isedawishy
GTPPTT6REIGHTY
- Joined
- Jul 21, 2015
- Threads
- 66
- Messages
- 804
- Reaction score
- 183
- Location
- Fort Worth
- Vehicle(s)
- 2015 GT
- Thread starter
- #1
I threw a Hurst pistol grip on my Magnum XL with a MGW shifter and like it, but it rattles at high rpm when on the throttle.
I've tried multiple fixes, but nothing works. Any other ideas?
- Tried teflon using the MGW jam nut
- Tried teflon using the Hurst jam nut
- Tried locktite using both jam nuts
- Tried RTV sealant on both jam nuts
- Tried backing out the jam nut a 1/4 turn, 1/2 turn, 1 turn, 2 turns
- Tried using rubber orings between the jam nut and shift knob
- Tried putting dynamat all over the shift base
I don't know what else to try. I like the shift knob and want to use it, but if it rattles it defeats the purpose.
I've tried multiple fixes, but nothing works. Any other ideas?
- Tried teflon using the MGW jam nut
- Tried teflon using the Hurst jam nut
- Tried locktite using both jam nuts
- Tried RTV sealant on both jam nuts
- Tried backing out the jam nut a 1/4 turn, 1/2 turn, 1 turn, 2 turns
- Tried using rubber orings between the jam nut and shift knob
- Tried putting dynamat all over the shift base
I don't know what else to try. I like the shift knob and want to use it, but if it rattles it defeats the purpose.
Sponsored