TR6060 traction control

Guys that have made swap...any issues with traction control. Did some logs for lund and car felt slow. Log shows timing being pulled. Jon noted traction control pulled timing because it thought the tires were about to spin. I had advance traction "off". After thinking about it a bit i havent really spun the tires much at all, if any, since doing the swap. I thought it was because of the gearing difference in the transmission. Now i am wondering if its something different??

I didn't have any issues at all. Traction control on or off, normal driving mode or track.

Me either. I could spin the tires all I wanted. With everything disabled.

Must be me..looking at logs it showed source 2 at about 5000 rpm's and that when the timing was being pulled..source 2 is TC engaging...must not have had it all turned off.

have you just one click disabled it or click hold disabled it fully ?

hinch said:

have you just one click disabled it or click hold disabled it fully ?

Click to expand...

I always turn off everything when i get in the car to drive it (hold button down for 5-6 seconds) - Advance Trac Off. This time I must not have and just turned off some of the nannies by pushing the button. Very unusual for me, but not ruling it out. Once the weather dries out here I will go do some more hits and see what happens.