BMR spring question.

I’m curious as to why you guys and a lot of other car run a different combo spring for drag racing than your drag spring kit? Link below shows the drag kit and the 88/89 set up a lot of drag racers use including your guy’s car (per the picture). Just curious is all not throwing shade or anything. Mainly because I’m just curious and because your site has the low wolf springs (SP089).


http://www.mustang6g.com/forums/showthread.php?t=16517&highlight=BMR

V8 cars without boost and EcoBoost cars should use SP086

V8 cars with boost should use 089/088

BMR Tech said:

V8 cars without boost and EcoBoost cars should use SP086

V8 cars with boost should use 089/088

Click to expand...

Ok makes sense.... the 89s are for the extra weight in the front?

Also do you guys know the sprint rate for ecoboost/v6 springs

I have the handling springs and looking to add boost over the winter. Is it ok to keep the rear handling springs and change the front to minimum drop?

So in another thread Kelly said that there will be a revised handling spring that doesn't have as much of a drop. Might want to just wait for those. I want to get a set. It's like waiting for Christmas when you don't know when Christmas is going to come.