Steeda S550 Ultralite 2-Point G-Trac Brace - Now Available!

The Steeda Ultralite 2-Point G-Trac Brace fits every model mustang from 2015-2016+ and up (GT, GT350, V6, EcoBoost) and was designed to complement the famed GT350’s suspension, while allowing the most versatility in aftermarket fitments - our brace even allows fitment for long tube headers without affecting ground clearance! This brace adds stiffness to your vehicle's front subframe in both bending and torsion, greatly reducing your wheels' suspension compliance.

Steeda S550 Mustang Ultralite 2-Point G-Trac Brace (15-16 All) | 555-5533: $79.95







Steeda’s S550 Ultralight 2-Point G-Trac Brace is the lightweight stiffness champion. Pound for pound this brace adds more stiffness to your chassis front subframe than any other unit on the market - our brace weighs in at a mere 5.5 lbs!

Key Benefits:

- Improves chassis stiffness and suspension compliance
- Weighs in at a mere 5.5 lbs.
- Extremely compatible with other aftermarket components (headers, etc.)
- Improves vehicle response and predictability
- Installs in minutes
- Made in the USA, lifetime warranty







Please note, this cannot be used in conjunction with our S550 Extreme G-Trac Brace.

Give yourself the competitive advantage with a more responsive turn in, faster lap times, and a more predictable handling experience with Steeda's S550 Ultralight 2-Point G-Trac Brace for your 2015-2016+ GT, GT350, V6 or EcoBoost today!

Steeda S550 Mustang Ultralite 2-Point G-Trac Brace (15-16 All) | 555-5533: $79.95

just installed mine & must say it was as easy as ANYTHING i have ever done. People say they need to clear out slag or other manufacture things, passenger side went right in, the driver side was "much harder" i had to bend the spacer arm a little to get it to line up.
whole process took 10 min tops. just doing about half hour after work on it after work, front sway & struts & "kick it in the ass to see if it screams"

Steeda 2-Point Brace..

I want to thank David at Steeda, and everyone there at Steeda for what they do for us guys and gals for our Mustangs. I just Installed on my GT350 the new Steeda S550 Mustang Ultralite 2-Point G-Trac Brace, it helped the lower end of this 350 a lot, it helped take the little bit of steering wondering from side to side, and made the bottom end feels stiff now and that side to side wondering is now gone.... The Steeda part is a must for this new GT350 the best $79.95 I have spent on this car Beside the Steeda 35# Clutch spring. :cheers: thanks John

Another photo

Another photo of the Steeda 2-Piont G-Trac Brace. :cheers:

[MENTION=10475]Old Car Guy[/MENTION] hey thanks for posting, John! So glad you're happy with the new g-trac brace, here is a list of parts that are confirmed to fit the GT350

555-1016 Steeda Mustang Rear Sway Bar (15-16)
555-1018 Steeda Mustang Drag Race Rear Sway Bar (15-16 All)
555-4039 Steeda Adjustable Heavy Duty S550 Engine Mounts (15-16 GT, GT350)
555-4117 Steeda S550 Mustang Rear Lower Control Arm Spherical Bearings (15-16 All)
555-4120 Steeda S550 Mustang Adjustable Rear Toe Links (15-16 All)
555-4121 Steeda S550 Mustang Billet Aluminum Vertical Links (15-16 All)
555-4438 Steeda S550 Mustang IRS Subframe Alignment Kit (15-16 All)
555-5070 Steeda S550 Mustang NHRA Legal Driveshaft Safety Loop (15-16 All)
555-5205 Steeda S550 Mustang Ultra Lite Chassis Jacking Rails (15-16 Coupe)
555-5533 Steeda S550 Mustang Ultralite 2-Point G-Trac Brace (15-16 All)
555-5731 (with an additional spacer) Steeda Mustang Strut Tower Brace (15-16 GT/EcoBoost All)
555-5754 (if you machine the lock collar, it will fit no problem) Steeda S550 Mustang Rear IRS Subframe Support Braces (15-16 Coupe)
555-7022 Steeda S550 Mustang Clutch Spring Assist 35 lb/in (15-16 All)
555-8139 Steeda S550 Mustang Camber Plates (15-16 All)
555-8147 (will work with our bars but not with the stock bars) Steeda S550 Billet Rear Sway Bar Mounts (15-16 All)
555-8148 Steeda S550 Billet Front Sway Bar Mounts (15-16 All)
555-8149 Steeda S550 Billet Front and Rear Sway Bar Mount Kit (15-16 All)

David@Steeda said:

[MENTION=10475]Old Car Guy[/MENTION] hey thanks for posting, John! So glad you're happy with the new g-trac brace, here is a list of parts that are confirmed to fit the GT350

555-1016 Steeda Mustang Rear Sway Bar (15-16)
555-1018 Steeda Mustang Drag Race Rear Sway Bar (15-16 All)
555-4039 Steeda Adjustable Heavy Duty S550 Engine Mounts (15-16 GT, GT350)
555-4117 Steeda S550 Mustang Rear Lower Control Arm Spherical Bearings (15-16 All)
555-4120 Steeda S550 Mustang Adjustable Rear Toe Links (15-16 All)
555-4121 Steeda S550 Mustang Billet Aluminum Vertical Links (15-16 All)
555-4438 Steeda S550 Mustang IRS Subframe Alignment Kit (15-16 All)
555-5070 Steeda S550 Mustang NHRA Legal Driveshaft Safety Loop (15-16 All)
555-5205 Steeda S550 Mustang Ultra Lite Chassis Jacking Rails (15-16 Coupe)
555-5533 Steeda S550 Mustang Ultralite 2-Point G-Trac Brace (15-16 All)
555-5731 (with an additional spacer) Steeda Mustang Strut Tower Brace (15-16 GT/EcoBoost All)
555-5754 (if you machine the lock collar, it will fit no problem) Steeda S550 Mustang Rear IRS Subframe Support Braces (15-16 Coupe)
555-7022 Steeda S550 Mustang Clutch Spring Assist 35 lb/in (15-16 All)
555-8139 Steeda S550 Mustang Camber Plates (15-16 All)
555-8147 (will work with our bars but not with the stock bars) Steeda S550 Billet Rear Sway Bar Mounts (15-16 All)
555-8148 Steeda S550 Billet Front Sway Bar Mounts (15-16 All)
555-8149 Steeda S550 Billet Front and Rear Sway Bar Mount Kit (15-16 All)

Click to expand...

Ok David thank you for this list on on Steeda parts that will fit the GT350, I'm sure there is a lot that will go on this 350... Again thank you Steeda! :cheers: John

Purchased a 2 Point G-Trac Brace on the Labor Day Sale! Installations was quick and easy, I think it took longer to put away the tools and ramps.

It made the front end of my DD EcoBoost feel much more solid on twisties, very pleased with the results. Thanks Steeda for another great product addition!

We'll keep em coming!

TJ

What are the dimensions of the box that it is shipped in? I'm overseas and need to know in order to calculate shipping charges. Thanks in advance.

Bobby - let me check for you, can you send me your email address to [email protected].

We can calculate shipping for you to your desired destination.

TJ.

Hello,

47x7x7 And it weighs a little over 6lbs.

Best Regards

TJ

bjstang said:

Thanks [MENTION=7748]tj@steeda[/MENTION] order placed.

Bill

Click to expand...

Glad I could help - appreciate the support

TJ