Gt350 manifold and TB

Cruizer40 · Feb 23, 2017

Hello all
Im wondering if my PMAS intake will still fit with this mod, does anyone out there know?

greymatter · Feb 23, 2017

GTBOB · Feb 23, 2017

[MENTION=18987]BlackBoostedStang[/MENTION]

This user has the particular setup you are asking about. Maybe he can chime in with any modifications that maybe be required.

09jsw · Feb 23, 2017

Just need to get a 4in to 4inch coupler.

beefcake · Feb 23, 2017

yep, need a different coupler,

Cruizer40 · Feb 23, 2017

Thanks everyone

BlackBoostedStang · Feb 28, 2017

GTBOB said:
[MENTION=18987]BlackBoostedStang[/MENTION]

This user has the particular setup you are asking about. Maybe he can chime in with any modifications that maybe be required.

Sorry for the late reply on this.

So with the PMAS intake and the 350 IM, if you are running the stock throttle body you will need to use a spacer adaptor plate so the throttle body can bolt to the intake manifold ( I went with MRR)

Since the intake protrudes straight out before making a 90 degree turn, it gets pretty close to the bottom of the hood with the spacer. However, I have yet to see it rub, no marks on the intake or anything. Just food for thought.

Cruizer40 · Feb 28, 2017

BlackBoostedStang said:
Sorry for the late reply on this.

So with the PMAS intake and the 350 IM, if you are running the stock throttle body you will need to use a spacer adaptor plate so the throttle body can bolt to the intake manifold ( I went with MRR)

Since the intake protrudes straight out before making a 90 degree turn, it gets pretty close to the bottom of the hood with the spacer. However, I have yet to see it rub, no marks on the intake or anything. Just food for thought.

Thanks

newkidnik · Feb 28, 2017

So I'd need an adapter if I wanted to run the GT350 TB on the stock GT manifold?

Terminator2 · Feb 28, 2017

newkidnik said:
So I'd need an adapter if I wanted to run the GT350 TB on the stock GT manifold?

Yes. The bolt pattern is different.

GTBOB · Feb 28, 2017

newkidnik said:
So I'd need an adapter if I wanted to run the GT350 TB on the stock GT manifold?

Yes, you would need this adapter kit from Blowfish. Note the additional piece that rotates the purge valve slightly.

https://www.blowfishracing.com/engi...g-coyote-50l-gt350-throttle-body-adapter.html

Terminator2 · Feb 28, 2017

GTBOB said:
Yes, you would need this adapter kit from Blowfish. Note the additional piece that rotates the purge valve slightly.

https://www.blowfishracing.com/engi...g-coyote-50l-gt350-throttle-body-adapter.html

I've heard people say the purge still hits the throttle body even with the adapter.

Gt350 manifold and TB

Cruizer40

Well-Known Member

greymatter

Well-Known Member

GTBOB

Well-Known Member

09jsw

Well-Known Member

beefcake

Well-Known Member

Cruizer40

Well-Known Member

BlackBoostedStang

Well-Known Member

Cruizer40

Well-Known Member

newkidnik

Well-Known Member

Terminator2

Well-Known Member

GTBOB

Well-Known Member

Terminator2

Well-Known Member