Short Stemmed TPMS'

Paul or anybody else

Will these work on my wheels??

http://www.amazon.com/Outer-Mount-A...6940&sr=8-10&keywords=t6+premium+TPMS+adapter



I think I'm just going to need 2 of them on the front


Is this what our TPMS sensors look like assembled? I need to know if these valve stems will work with our TPMS sensors

For reference Darren, these are the TPMS I am running.

http://www.steeda.com/oro-tek-s550-mustang-tpms-sensors-2015-all-351-osc-f2ga-a/

Todd15Fastback said:

For reference Darren, these are the TPMS I am running.

http://www.steeda.com/oro-tek-s550-mustang-tpms-sensors-2015-all-351-osc-f2ga-a/

Click to expand...

Thanks Todd for the link and input.:cheers:

I'm going to try to mock up the MMD wheels on my car tomorrow and show you guys how close the valve stem location is and how there is a potential to hit the caliper. The valve stems are located in the middle of the wheel barrel so when the wheel rotates, the valve stems may come in contact with the larger 4 pot calipers.

Darren,

Is the same way with the Verde Axis V99 wheels for instance those loop adapters you posted today will do the trick.

Wheel_Guy said:

Check this one:
https://www.lugnutguys.com/product/tpms-valve-stem-short-20010

Click to expand...

I may go with these since they're black. Yall did say these will work as well right? I'm just not sure how I'd address the chrome ones on black wheels. I'd have to paint them or something.

yes

Need4SpeedMotors said:

yes

Click to expand...

:cheers:Thanks

One more question for you Paul:lol:

What tire size would give me this look on (4) 19x10 +45 wheels

Here is the thread: http://www.mustang6g.com/forums/showpost.php?p=1182190&postcount=1107



Meaning, what 19" tires would replicate that look on my car????

Well you have a few choices brotha

So for instance if you want you can run a square setup easily 275/40/19 or 285/35/19 all around this way you can rotate the setup.

However if you dont want to do that then I would do a 275/305 combo = ) make it meaty.

Anyone make a 45 degree stem?

Wheel_Guy said:

Check this one:
https://www.lugnutguys.com/product/tpms-valve-stem-short-20010

Click to expand...

FYI, these won't fit a .453 hole. They are too big.

ponie1992 said:

FYI, these won't fit a .453 hole. They are too big.

Click to expand...

:eyebulge::eyebulge:

Whaaaaaaaaaaaaat?!?!?! [MENTION=20738]ponie1992[/MENTION] You have the 19x10 +45 offset MMD 551C wheels too and you've tried these valve stems and they don't work????

I have these valve stems and wheels.........just waiting for tires:headbonk:

Ultrakla$$ic said:

:eyebulge::eyebulge:

Whaaaaaaaaaaaaat?!?!?! [MENTION=20738]ponie1992[/MENTION] You have the 19x10 +45 offset MMD 551C wheels too and you've tried these valve stems and they don't work????

I have these valve stems and wheels.........just waiting for tires:headbonk:

Click to expand...

No, I'll be running the KMC District in bronze 19x9.5 35 offset.

ponie1992 said:

No, I'll be running the KMC District in bronze 19x9.5 35 offset.

Click to expand...

Oh. Ok. Thanks for the fast reply!!!:cheers:

Ultrakla$$ic said:

Oh. Ok. Thanks for the fast reply!!!:cheers:

Click to expand...

No problem. I bought the shortest mechanical stem I could find and they still won't work. Ordered a set of flush mount stems and mounted my new sensors to the wheels.

ponie1992 said:

No problem. I bought the shortest mechanical stem I could find and they still won't work. Ordered a set of flush mount stems and mounted my new sensors to the wheels.

Click to expand...

So did you use the bands to attach the sensors or something else??