Bartly
Well-Known Member
I had to use a ratchet strap from one side to the other to allow me to finger tighten all the bolts before torquing them down.I'm stuck. Somehow this shit can never go smoothly for me. Had trouble on the drivers side front cradle bolt, getting it lined up without stripping it. Finally got it figured out so front and back bolts on the driver's side were good. Moved over to passenger side. Rear bolt lined up fine, but for the life of me I cannot get the front bolt to line up. I've pried, i've loosened all bolts, I've raised and lowered the cradle. At this point, I've pulled the rear bolts on both sides, but not the front bolt on the driver's side cause it took me forever to get it in.
Sponsored