Is it possible to BAND mount valve mounted TPMS sensors? 2015 model

I have installed some new wheels, and a TR413 standard valve stem does not work. For now I found some ever so slightly shorter that work (although I have to take the caps off the rear stems for caliper clearance...it is that tight).

Is there a band / adapter scenario where I can use the 2015 TPMS valve stem mounted sensors still?

The ultimate would be a TR412 with TPMS stem mount, but scouring the internet does not show it available anywhere. I tried the Orotek shorty stems, but they were not compatible with the hole and oddly recessed, angled opening. I even tried the flush mount style, again the recess would not allow a proper seal.

I must use a standard, rounded bottom snap in style rubber stem for this to work OR find a band adapter situation.

Well, I got an answer from seller "lugnutguys" on eBay:

http://www.ebay.com/itm/TPMS-BANDS-...ash=item3f44ddc647:g:lo8AAOSwT5tWG-rh&vxp=mtr

What wheels are these ?

Paul@PKAUTODESIGN said:

What wheels are these ?

Click to expand...

JNC026 18x9

It's a small, recessed opening on the face and it's drilled in an angled area. Very odd location indeed! This image is trying to use a standard TR413.

I have the band adapters on the way, as well as chrome sleeve TR412 which I already know will clear all calipers.