Decided it was not worth the effort of removing my stock-location upgrade Mishimoto Intercooler out of my 2016 to swap into my new special order 2021 I took delivery of last Friday.
Pulled the plastic under panel off the 2016 and I saw some flaking paint and aluminum corrosion from 5 years...
There have been a couple of threads that included these hoods in the discussion, but nothing all that recent.
After 83k miles and over 4 years of daily driving my Ecoboost I've got the dreaded aluminum hood corrosion on the drivers side front corner just as my 2011 before it had after about the...
Anyone use this with stock cats ??
I'm looking to try some in my 1969 Mustang as it still needs a lead substitute (no hardened seats) and a "2.5 octane number" boost @ 1 oz per gallon of gas is decent considering I've found it for just under $47 a gallon delivered.
Anyway, main reason...
First MOD I did back when I got the car in May 2016 was put on a UPR Dual Valve Catch Can ... car had less than 30 miles on it and 6.5 months later it has around 12k miles.
UPR Checks are correctly oriented per their diagram (checked more than once) ... captured about 1 oz. after the first...
Just installed my MGW yesterday and the only complaint I can come up with is the stick is so short that you are rubbing your arm on the console top when shifting into 2, 4, or 6.
First adjusted MGW Knob out a bit to the point where thread was just fully engaged in the brass insert (5/8") ...
Winter is coming and I'm looking for a new set of Winter Wheels to put snows on and N-T-O has two that I'm considering ...
http://www.newtakeoff.com/mustang_wheel_2005-10_5spoke_aluminum_silver_bullitt_set_of_four.aspx
... $240.00 shipped for a set of 4 17x8 2005-10 Bullitt wheels is almost...
My car came with the Engine Block Heater (that I will never use) so it gets the non-matching ACC style lower grill.
Anyone got a std. V6/EB Lower (matching) Honeycomb Grill or a GT Upper / Lower matching Grill set laying around ??
Name your price shipped to 54241.
Thanks,
Doug
With all the threads on this subject (that I've read) I hate to start a new one, but from reading those threads I don't think I should be experiencing the "Smoking at Idle / SMOKE SHOW".
I've had my car 2 weeks and it was built 4/20/2016 ... base model non-PP Manual.
First MOD I did was put...
Are there lights back there like the S197's ??
If so, are they located in the back of the console like S197 or somewhere else ??
Rented a 2015 Premium EB for a week back in November 2014 and don't remember if there were lights back there or not, looked though various "Interior Pics"...
All that is stated in the description is you can change between "7 colors" using the supplied knob/button control.
Can you also adjust the "brightness" like I can on my 2011 (& assume 15-up) Premium ??
Thanks,
Doug
Just curious if is triggered by the dealer when they receive it or is somehow triggered when the delivery guy is done and driving away.
If it is not the dealer, then the system would know when a car is delivered "after hours" when dealer is closed.
At least 2 of my cars have been...
I've read through all the threads, and there are a few questions un-answered. Also, there is no thread where all three of these Ford parts are added to one vehicle all at once so I thought I'd start a new thread.
On the Ford Accessory A-L Kit (CL8Z-13E700AA), can you DIM the lighting like...
Anyone have either of these systems ??
I really like how they do the rear muffler/resonators for the clean look out the back and I would think it would be a pretty light-weight system compared to most others.
Gibson & Stainless Works are the other two I'm considering.
Doug
Searched and could not find any pics of these factory stripes. They look decent on the build & price, but this does not show the colors accurately so I'm guessing the stripes are not all that accurate either.
Owners with this FACTORY option please post pics !!
Doug
In a recent thread about EB max speed, there was some discussion about non-PP Automatic cars coming with 3.15 or 3.31.
It was always my understanding that ALL EB's with A/T had 3.15 and ALL M/T had 3.31 (except PP where all are 3.55).
On Ford's B & P ...
Base model 100A 3.15 is std but...
Was at my dealer yesterday and their wall chart showed ...
Last day to order a 2015 was mid-June (think it was 06/12) and production ends sometime mid July.
I'm sure these dates are subject to change, but this is the 1st I've seen any official Ford document stating "when".
Gives me a...
Tried to do a screen capture and post it here like I see others do, but all I got was the text.
1FA6P8CF4F5301666
This VIN is one of the Extended Inventory to my dealership that I've been tracking since early October.
Status has always been "AWAITING SHIPMENT" and has never has a...
I've been tracking the status of 2015 Mustangs coming to eastern Wisconsin for the past couple of months. This list of cars is from the Ford website that are considered "Extended Inventory for my local dealer Maritime Ford in Manitowoc, WI". Don't know what kind of radius this is, but it...
Just picked up at the Orlando airport from Budget ... car had only 42 miles on it, so I've got to be it's 1st renter !!
She ain't no rental V6 either ... Premium EB A/T !!
Had reserved a V6 Mustang in late August and was "hoping" they'd have the 2015's in by November 7th.
The car...