During my 8 months and 10k Miles of ownership, I’ve had a few firsts of any new car I’ve ever purchased.
The first time I ever had to:
Adjust the headlights on a new car
Change the trans fluid (M6)
Have an alignment done
Chase creaks, squeeks and rattles
Wipe the oily, streaked film from...
I’m bought my 17 back in November so no AC usage. With all the talk of evap core problems, I started trying mine to see if it works properly. Holding my hand in front of one of the vents (base GT) it blows cold for about 15 sec and then really cold for about the same. It seems to cycle like this...
I thought I would try a K&N panel filter on my 17 GT based on the MotoIQ testing and years of using them on other vehicles. The problem I found is after installing it is the clips that hold the filter housing together barely clip at all. The filters gasket is much thinner than the oem filter...
What do you do when your knob doesn’t fit your hand properly? The stock knob is way too small for my 3XL hand so I started looking at the aftermarket companies. I checked Anarchy, Raceseng, Lathewerks etc. and found the Ashiko knob from Raceseng looked like something that might work. The price...
For you guys in the cold climates with aftermarket shifters, just wondering if you still get the poor shifting (notchy/nibbles) on those cold mornings.I changed my fluid to the BG and am ok with the stock shifter when the trans warms up. Seeing as the shifting does improve when warm, I’m...
When I started off for work this morning the outside temp gauge showed -9 degrees. The next time I looked it showed this. After work It was normal. Any ideas?
The plan was simple, Change the chrome grille pony for a black one. I read about the stick on ones not holding and the oem version had fragile pins. They both cost about the same so I decided to go OEM.
I took the radiator cover off and removed the hood latch for the most room. The old pins on...