Search results

Still here, still interested. Just saw the poll and filled it out. I hadn't been receiving notifications for some reason.

I'll be picking up a set of takeoff PP wheels soon and I am wanting to try and put on black lug nuts when the wheels get switched over if possible. I searched around on the forum and saw a lot of recommendations for the Gorilla 96643BDX set, but paying $110 for lug nuts of all things is pretty...

Please post a video when you get it all sorted out. This is the setup I would like to try as well. I currently have the GT cutback but haven't done anything else to it as I haven't heard that setup before. Also let me know how drone is, if there is any at all.

Sounds interesting, I certainly wouldn't be opposed to having it for those long road trips.

Yes, you'll need to order the converter (which is like $2 on eBay) and attach the crimp pins to the wires on the converter. These pins just fit into the slots on the back of the mirror and the camera will turn on whenever you start the car, so it will start recording automatically.

I still have 3 left, so if you want any of them they're just $1 each. They work great with our mirrors, so I guess I just got lucky when I ordered them.

Honestly I'm not even sure what the difference is, I know pretty much nothing about electrical components. Yours do look a little thicker than mine did though. The ones I had just slid right in no problem so I'm not sure what your problem could be.

PM me and I can see about mailing you a few.

I don't think it drains the battery. The mirror is only powered when the car is on so as soon as it turns off my dash cam stops charging.

I purchased these crimp pins. It ended up being about $10 for 10 of them due to shipping and a $5 fee for a transaction under $5... I still have a bunch left over I could mail you for much cheaper if you don't want to buy 10 of them. As for the holes the pins go in, they both go in the...

I just did this recently myself. I ordered this converter from eBay and attached a crimp pin to the wires using pliers and wrapped it in electrical tape. Works great and cost about $13 (with 8 pins left over), which is much cheaper than any actual products I could find.

Yes I know, I watched the videos already. i was just hoping to find some more examples than just those two. I didn't really have any luck finding more on YouTube.

Have any videos? I'm thinking about going with this setup.

http://www.ebay.com/itm/Car-Power-Adapter-DC-12V-to-5V-3A-15W-Waterproof-DC-Converter-Mini-USB/271284258951?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 Editing my original post to say this product works great. I was missing some pins to actually extend into the sockets which is...

Mine used to be that way. Now after the J-Pipes there's no drone at 1600-1800 and no drone 2200+. Only at 2000-2100 range, but that was the problem to begin with and the whole reason I installed them in the first place. Thanks for the suggestion. Honestly at this point if I can't get the...

I've thought about that too. The exhaust shop that installed the Flowmasters and H-Pipe mostly does truck installs, but it was the only shop I had access to at the time so it's very possible they messed something up. I didn't have much faith in them to begin with but didn't have much of a...

Thanks for the reply. Unfortunately I did try setting my J-Pipes to 34 inches already and absolutely nothing changed in the car. I also tried 28 inches just to see if anything happens and nothing was affected either. The drone is gone at the 1700 rpm range and above 2200 and neither were...

I recently installed J-Pipes from Solo Performance on my V6 with Flowmaster Outlaws and an H-Pipe to reduce the drone (it is absolutely terrible at 2k RPM). After installing initially, it did quiet down the interior quite a bit while driving around town, but the actual problem spot wasn't...

I've had this thread saved for awhile and whenever I get around to upgrading the stock screen this is definitely the one I am most interested in. That being said, after reading through the thread I have a few questions. 1. Did anyone ever get the bluetooth issues with iPhone figured out? I have...

Would a double h-pipe achieve this same effect? I've never heard of doubling up H-Pipes or X-Pipes before. I currently have Flowmasters and an H-Pipe and the exhaust drone is crazy loud.