Search results

It was,Im over it now.Ill post results when I get a spare min.Thanks for the comments.

Straight line pulls,feels like the car has rear secondary movement like its on a slick

Ill have to run it back down to the dealership and have them look at that.Its really my only real gripe with the car other then broken downpipe studs,ugh need to drill and tap those out one of these days.For now c-clamps been taking the place of one broken stud.

Acceleration,if the car hits any kind of deviation in the road,I feel like a bobble head,It could be weak sidewalls,but its def rear end swaying as well.Id hate to add weight to the car with stabilizers or extra aftermarket crap.I still need to do more homework and find out what cures most if it.

All my car does is squirm back and fourth,it follows every un even line in the road.Is this usually and indication of a rear alignment issue.Tire pressures good,just feels like its on weak sidewall slicks.

Id like to add some oem gt rear suspension,maybe some poly rear cradle mounts,some bad ass front drag struts if their available.The car swaggers back and fourth like its on slicks I guess its pretty common for the rearends to wiggle waggle back and fourth.The one annoyance about the car that ive...

I plan on doing some testing with the intake pipes,and aircleaners,along with trying to witness crank case data from the valve cover breather,I love the way my car runs,A little to much squeeze off the line and it will smoke the tires forever or until it wraps your hands up in the steering wheel...

Last year aem dry panel filter,mit airaide pipe,upr dv catch can system,cobb stage1 91 tune,(which I really like,at least my car does),I splashed the tune with 100 octane last year and the car ran 13 flat at 104.5 stock oem plugs too. This year Ive re-installed the stock inlet pipe,(car feels...

I believe there is a crank case sensor that the cobb some how picks up,(not sure how)but it def shows a positive number growth while under boost,Id be curious how that number changes after the breather is installed.To answer your question I guess Ill be trusting that the cobb is reading and...

Ill test the readings and post the results.

Good stuff

Been 4.9 twice,with a handfull of 5.0s running 331 gears and factory semi worn 17 inch touring tires.Running the cobb stage 1 91 tune with panel filter and generic offroad downpipe,Denzos factory heat range gapped to .026.Also have a rear 02 cel cars prob a tad fat but doesnt bother the...

Ive installed the brisk,Adam picked up some weirdness from those,He suggested to go back to the oem until I had a chance to install some denzos.Ended installing denzo factory heat range (my choice) and ever so gingerly and slowly gaped them to .026,well worth the change.The motor runs smoother...

Has anyone measured or monitered the crankcase pressure before and after installation of the Upr crank case valve cover breather,Looks like cobb/Ford has a moniter for that just wondering if anyone has done the back to back,Finally ordered mine to co-exist with their dual valve catch can...

I say buy what you can afford or are willing to wait for,Im on the factory intercooler still,its a daily go to work and back fourth car for me,my focus is on my pushrod stuff.When the racecars are finished I may entertain doing a couple small mods on the eco,if not Im happy enough with how it...

I aggree,I wasnt disagreeing or agreeing more or less,just trying to stay neutral.Whats the best temp at w.ot that hobbyists are seeing with the available"better"intercoolers? One type I def wouldnt buy are the tiny oem sized aftermarket generic or otherwise.I think if your going to buy a unit...

Whatever has good data,I havent taken the time to upload close up pictures of the core channel overlays,My understanding from what ive gathered on pushrod stuff is the finer and more overlapped the core material the better they cool,But there is a downside to the tighter thinner core material,it...

What hurts U.s companies is keeping our dollar worthless by printing trillions of unregulated fed reserve dollars,At the rate they are printing it kills the supply vs demand theory and throws it in the toilet.I would love to buy everything american,I cant afford to use my what was once...

Id buy the atm before I tried anything else,but thanks for assuming,Im sure with the cores that everyone's using its not much of a difference,short of a very small cheap mishimoto core.If a water to air comes out before to long Ill go that route.

Sweet