Search results

I just had this happen to me; the cap on the lug nut deformed and then started spinning. I was able to tear off the cap exposing the 'pot metal' nut below. question; what size socket is need to then remove this nut? It seems that the 21mm or 13/16" is a bit sloppy, I have not tried either yet...

A couple more diagrams that might be of help...

I wouldn't rely on my diagram, it was intended as a quick visual (the plug could be upside down) See rb92gt drawn diagram (Page 12) to match the pins with wires. 1 into 4 and 2 into 21. Hope this helps...

Thanks to Tank, jwb, GT_Dave and rb92gt; I have the differential sensor monitoring the temp...I have not threaded it into the diff yet, so as you can see the temp is the ambient temp of my garage.

Have a look at this video, it is for adding CJPony fog lights to the GT350, but the video details bumper removal etc.. might help... [ame]

Hey Tank, kgschrader, jwb, rb92gt, cking, Hack, GT_Dave and others.. I have been reading the post on adding the Diff Temp sensor to a Tech Pack car. Really exhausting...I did notice that in the threads it was mentioned that some of you were initially just going to add the sensor to monitor...

I noticed that the Shelby Transmission Cooler Scoop is not available on the Shelby Parts website....

I saw this on the web and transposed my phone display to see what it might look like, seems simple enough? Velcro strap and a couple of clips... Although it might interfere with the dash cluster... Also there was a thread that discussed odb2 gauges from AEM at...

I have been looking at this http://www.mirrorlink.com/, but haven't figured out the details yet...

Too bad we can't customize the center console display like the GT-R...I wonder if this can be done with Mirrorlink and Torque Pro... Thoughts

What I have heard is that Falcon Graphics are the onsite shop that made the decals for the GT350 Track Attack cars. Contact info is: Clark Hill Falcon Graphics, Inc. at Miller Motorsports Park 801-831-3719 clark.hill @yahoo.com

The caption on the photo says '2016 and newer GT350' ???

I saw that too, it seems its for 2005-2014 previous generation Mustang, but the magazine said specifically for 2016 and newer GT350... got me..

I picked up the 'Shelby Annual' from the publishers of Mustang Monthly and there was an article on Shelby American Parts. I have attached an interesting picture; a cooling scoop, but the interesting thing is the blue lines(Shelby parts?) that look like they are entering/exiting the...

Or a Triumph bobber like this... http://thebikeshed.cc/2013/07/11/oily-rag-bobber/ or the latest incarnation of a Brough Superior... http://www.broughsuperiormotorcycles.com/

Hi Dave, please PM discount code. Thanks

Does the 'Kit' include the ducting?

Finally got around to the coil covers, painted them myself and then got letter/stripe inserts from EmblemPros, thought it turned out OK for DIY...

All one day sessions are full up !!! Guess I left it too late, you snooze you lose... They have 2 day sessions left 24-27, but I will have to think about it... They don't start up again until Apr and that is over the 12 month period for me.

Thanks, Do let me know how it went..