Recent content by Artem

I believe for Auto you have to dyno on 4th gear and on manual car 5th gear. That might explain low dyno numbers.

If you worry about 14.7 AFR during cruise/idle you can ask Torrie to leave at 13.9-14.0(stock). That's what I asked him to do on my GT flex fuel tune. He is a great tuner and will work with you to squeeze every bit of power in safely manners.

I think RXT clutch has something to do with it. Maybe its time to switch to RST?

I have Hoosier bias ply slicks & skinnies and no problem with swaying. I set slicks at 13.5 psi and skinnies at 38psi. Launch at 6k. On the street I keep slicks at 23psi and skinnies at 35psi

Vehicle, Trim & Options: 16 Mustang 3.55 M6 Modifications (if any): FF Tune, BMR Springs, Pypes Catted LTs, H-pipe, Muffler delete, JLT Intake, Hoosier slick & skinnies. R/T......................................... .279 60'.......................................... 1.624...

I'm not sure if anyone realize but 9.65 run has been done in Gainesville, FL during 39.9f weather with DA of -1300. Good luck getting 9s during regular florida day.

Just use factory clamps and you will be ok.

275/45/18 Drag radial could work but I wouldn't use it for DD.

Tervis.com 16oz or 24oz w/lid will fit cup holder perfectly. Ask me how I know ;)

I only checked before runs. Only suspension mod is BMR performance springs. I did ran 15psi before no problem but now it got me thinking that my front stock radials had about 30psi at that time compare to last Thursday I had fronts at 34psi. I'll be looking into Hoosier bias-ply front runners to...

I have my stock 19" radials upfront and it was very scary last Thursday with 15psi in tire. My rear was walking away from me right before 1/8th mile so I jut let go the throttle and cruise down the strip. I up the pressure to 18psi and was able to do full run. 1.6x 60fts.

Wait what? 110 in 3rd? I'm 3.55 M6 and can only go up to 95 in 3rd.

So you ordered on 16th, 3 business days to ship so it would put us for the ship date of 19th Thursday but actual product shipped on Monday 23rd. So there has been delay of 2 business days. Get over it, sh1t happens.

Sorry for reviving an old thread, but have anyone done Corsa Touring + H pipe + Catted LTs?

So its pretty much confirmed that Demon will loose some weight.