Which lugs?

Got my race wheel set up together. I am running Hoosier 28x10 17 D06 on 17x9 Cobra reps {for now till I can go see my man Paul at PK} LOL

I should be able to run my OEM lug nuts from my base 18's on these wheels right? I test fit and they snugged up, but the 21mm socket is a tight fit in the chute and want to make sure I don't need an open end or thinner lug nut?

Thank you :cheers:

The cobra reps are aftermarket so they may need the 19 mm 3/4" acorn seat lug nuts.

Unless the wheel company says they can use the OEM lugs.

Paul@PKAUTODESIGN said:

The cobra reps are aftermarket so they may need the 19 mm 3/4" acorn seat lug nuts.

Unless the wheel company says they can use the OEM lugs.

Click to expand...

Like the ones you sent me? If you remember...it was almost a year ago LOL.

Replied to your pm but I'll post it here just incase anyone else ever has the same question.


Using the stock lugs but they've definitely seen better days. Because it's a soft metal and two piece design they get messed up quick. I bought some from autozone I've yet to put on. But any set should work fine. Just be aware you'll need a thin wall socket for the front SVE's Wheel. But after reading this thread it was more for the rear cobra's. The stock OEM lugs will definitely work. If you ever strip the stock lugs with an impact. Hammer on a socket and take it off. The soft metal of the stock lugs get messed up quick

Thank you again!