SC Ruby's Whipple Build

Whipple does motor builds?

Jmeo said:

Holy moly that list :eyebulge:

Well I'm just sitting over here with my jaw on the floor. Cant wait to see SC Ruby 2.0

Ill be at the mothership on Tuesday so I will be sure to seek it out and lay my eyes on it

Click to expand...

[MENTION=8761]Jmeo[/MENTION] Thank you my friend :cheers: Looking forward to V2.0 myself Hope you have a great trip out to Cali and enjoy your time with Dustin and the crew. Not sure if my car will still be at Whipple or over at Will's , but hope you do get a chance to see her

Super Werty said:

Whipple does motor builds?

Click to expand...

[MENTION=15791]Super Werty[/MENTION] Whipple is not doing the motor build. Will who works at Whipple is the one who is building the motor for me. He does motor builds as a side business on his own. He's an incredible mechanic and fully understands how to incorporate the Whipple SC for maximum power

Do you have any idea at this point what power level you are aiming to be putting down with the new motor set up?

SoCalTim said:

Do you have any idea at this point what power level you are aiming to be putting down with the new motor set up?

Click to expand...

[MENTION=18539]SoCalTim[/MENTION] it'll definitely be over 800 to the wheels but won't know for sure till all the finishing touches come together and final boost PSI is decided upon.

Did the car feel down on power leading up to the dyno day?

Meaning low long has the car been running with the low compression cylinder?

SoCalTim said:

Did the car feel down on power leading up to the dyno day?

Meaning low long has the car been running with the low compression cylinder?

Click to expand...

[MENTION=18539]SoCalTim[/MENTION] it did feel off for a bit before the Dyno day but 80% of the time I wasn't above 5K RPM's so it wasn't noticeable. Car was still driveable at normal RPM's so not sure how long it was an issue. Doesn't really matter now that the issue is known I'm not looking back.

Sorry to hear about your motor but WOW that build list is perfection! Look forward to following along!

Any idea how much you're gonna turn it up? Considering E85/Race gas tunes?

GT_Tommy said:

Sorry to hear about your motor but WOW that build list is perfection! Look forward to following along!

Any idea how much you're gonna turn it up? Considering E85/Race gas tunes?

Click to expand...

[MENTION=22238]GT_Tommy[/MENTION] Appreciate that and thanks :cheers: Not quite sure how much we're going to turn it up. All the parts being brought in will enable the engine to hold maximum power. Not going with a Race gas tune because this is still my daily driver and not going w/ E85 either as I drive way too much and don't want to be dependent on E85 stations or carrying fuel cans in the trunk. Over the next few weeks I'll be discussing with Will the options and making a decision on how aggressive it'll get turned up. Will definitely be over 800hp to the wheels

[MENTION=16215]SC_Ruby[/MENTION] What trunk organizer is that in the picture showing the trunk mat?

Right now I have a little velcro pouch that sorta tucks into the side, and it' not really cutting it. TIA!

-Alex

http://i1043.photobucket.com/albums/b432/dwallin6591/15_zps6i2afeaq.jpg

aex90832 said:

[MENTION=16215]SC_Ruby[/MENTION] What trunk organizer is that in the picture showing the trunk mat?

Right now I have a little velcro pouch that sorta tucks into the side, and it' not really cutting it. TIA!

-Alex

http://i1043.photobucket.com/albums/b432/dwallin6591/15_zps6i2afeaq.jpg

Click to expand...

[MENTION=7204]aex90832[/MENTION] it's actually from Ford Accessoties and works great

https://accessories.ford.com/compartment-asy-rear-stowage-11088.html

New Mods to Support the 5.2L Motor

So in order to support the incredible power from my new 5.2L motor being built; I've decided to add the following mods:

5.2L Motor Supporting Mods

Ben Calimer Stage 2 Tremec TR-6060 Transmission
MGW GT500 Shifter
Blowfish Bracket
McLeod RXT1200 Clutch
McLeod Lightened Steel Flywheel (welded & balanced)
ARP Flywheel Bolts
New Slave Cylinder, Pilot Bearing & TO Bearing
Ford Racing 3.31 Gears
DSS 1500HP Half Shafts
DSS Custom 1400HP Carbon Fiber Driveshaft
Whipple Oversized Aluminum Heat Exchanger

Looking at a completion date in early July

opcorn:opcorn:opcorn:

SC_Ruby said:

So in order to support the incredible power from my new 5.2L motor being built; I've decided to add the following mods:

5.2L Motor Supporting Mods

Ben Calimer Stage 2 Tremec TR-6060 Transmission
MGW GT500 Shifter
Blowfish Bracket
McLeod RXT1200 Clutch
McLeod Lightened Steel Flywheel (welded & balanced)
ARP Flywheel Bolts
New Slave Cylinder, Pilot Bearing & TO Bearing
Ford Racing 3.31 Gears
Ford Performance 1500HP Half Shafts
DSS Custom 1400HP Carbon Fiber Driveshaft
Whipple Oversized Aluminum Heat Exchanger

Looking at a completion date in early July

Click to expand...

opcorn:opcorn:

SC_Ruby said:

So in order to support the incredible power from my new 5.2L motor being built; I've decided to add the following mods:

5.2L Motor Supporting Mods

Ben Calimer Stage 2 Tremec TR-6060 Transmission
MGW GT500 Shifter
Blowfish Bracket
McLeod RXT1200 Clutch
McLeod Lightened Steel Flywheel (welded & balanced)
ARP Flywheel Bolts
New Slave Cylinder, Pilot Bearing & TO Bearing
Ford Racing 3.31 Gears
DSS 1500HP Half Shafts
DSS Custom 1400HP Carbon Fiber Driveshaft
Whipple Oversized Aluminum Heat Exchanger

Looking at a completion date in early July

Click to expand...

:cheers::ford: