CVCashmere
Well-Known Member
- Joined
- Mar 28, 2017
- Threads
- 99
- Messages
- 1,313
- Reaction score
- 682
- Location
- South Jersey
- First Name
- Carl
- Vehicle(s)
- 15 GT Vert w/Steeda lower brace, PP sways & susp
- Thread starter
- #1
My 2015 GT Vert came with a 20 mm rear bar. Thanks to "Chef", I was able to obtain a 21.7 mm bar off of his EB PP suspension he was upgrading.
MOST IMPORTANTLY, WE HAD TO DROP THE REAR SUBFRAME TO FIT THE BAR IN. Instructions did not tell us we had to do it...but after spending time trying to fish it through, the decision was made to drop the subframe.ves, it was a big help.
Will test it out this weekend. While at the garage, the mechanic allowed me to spray some undercoating over the painted surfaces. Much easier than jacking it up with a hand jack.
Finally, I would be curious if any GT vert are running the 22.2 mm bar off the HT PP???
Thanks
CVCashmere
MOST IMPORTANTLY, WE HAD TO DROP THE REAR SUBFRAME TO FIT THE BAR IN. Instructions did not tell us we had to do it...but after spending time trying to fish it through, the decision was made to drop the subframe.ves, it was a big help.
Will test it out this weekend. While at the garage, the mechanic allowed me to spray some undercoating over the painted surfaces. Much easier than jacking it up with a hand jack.
Finally, I would be curious if any GT vert are running the 22.2 mm bar off the HT PP???
Thanks
CVCashmere
Sponsored
Last edited: