Ebm
Well-Known Member
- Joined
- Nov 21, 2016
- Threads
- 66
- Messages
- 3,051
- Reaction score
- 1,340
- Location
- North Carolina
- First Name
- Guy
- Vehicle(s)
- '14 GT
.
One thing to note, when taking out the fog light/turn signal housing, there are clips holding the housing in after unbolting everything. You might think you are breaking the clips to get the housing out. You aren't. It takes some force. Just a heads up.
I am 100% certain there are only 2 ways to install turn signals. I just installed some several weeks back. Take off the front end or go through the fender well. I opted to go through the fender well. There isn't anything hard about replacing the turn signals, but it is time consuming. I'd plan on 3 hours for the whole thing. But the results after are worth the time and injuries! Haha :headbonk:Darn, won't be buying these if I have to take the bumper off. Will have to wait and see if there is a better way
One thing to note, when taking out the fog light/turn signal housing, there are clips holding the housing in after unbolting everything. You might think you are breaking the clips to get the housing out. You aren't. It takes some force. Just a heads up.
Sponsored