What can we do for You?

Benny,

What is the difference/improvement between the old IM GR3Z-9424-B and the new one GR3Z-9424-C ?

I've only heard durability but nothing specific.

Wally-Bob said:

Benny,

What is the difference/improvement between the old IM GR3Z-9424-B and the new one GR3Z-9424-C ?

I've only heard durability but nothing specific.

Click to expand...

Im not aware of any improvements or deficiency's of the previous part number. It's common for manufacturers to change part numbers, for example if the supplier changes. Sorry I dont have more detail on this specific changeover.

-Benny

Benny,
Is it possible to buy the bellypan mounting/support that is inside the performance pack splitter or would I have to buy an entire new splitter. It had this part number engraved in it FR3Z-17D957-BA
2016 mustang gt w/pp

oop said:

Benny,
Is it possible to buy the bellypan mounting/support that is inside the performance pack splitter or would I have to buy an entire new splitter. It had this part number engraved in it FR3Z-17D957-BA
2016 mustang gt w/pp

Click to expand...

Hi Oscar,

The belly pan is available as a separate part here https://parts.levittownfordparts.com/oem-parts/ford-under-cover-fr3z17626d

Here is our parts diagram showing this pan noted by a Yellow Square


The part number you provided was the actual splitter itself

Please let me know if you have any questions,
Benny

Any free ship codes on the PP2? 177 dollars for shipping seems kinda high for ground.

EDIT: Oops, I had two items in my cart. 67 dollars seems much better in comparison lol.

AppoTheApple said:

Any free ship codes on the PP2? 177 dollars for shipping seems kinda high for ground.

EDIT: Oops, I had two items in my cart. 67 dollars seems much better in comparison lol.

Click to expand...

Ill send you a code you can use

-Benny

Hi I'm looking to buy the PP2 pack from you guys., can you please PM me the discount code?

Sent you a PM with a question. Looking at some roush parts!

PM's sent guys

Thanks,
Benny

i am looking for the part number of the Ford Interior Door Switch Housing for the driver side door.
https://www.americanmuscle.com/ford-door-switch-house-ps-1516.html

mustangtaxman said:

i am looking for the part number of the Ford Interior Door Switch Housing for the driver side door.
https://www.americanmuscle.com/ford-door-switch-house-ps-1516.html

Click to expand...

Hi Tony,

Please message me your VIN and I will lookup the drives side switch housing for you.

Thanks,
Benny

Looking for part number HU5Z-19A387-A.

vder said:

Looking for part number HU5Z-19A387-A.

Click to expand...

no problem we have this available to order here https://parts.levittownfordparts.co...r-hu5z19a387a/?c=aT1NRzE1MzkzNSZyPWxheWVyXzk=

-Benny

Hey Benny...bit of an odd one here, hopefully you can help me out and it's not a wild goose chase.

I recently took my car in to have the evaporator replaced. When I got it back, the big gray locking connector in the interior fuse area is just dangling there. There is a slot on the back of the connector for a mounting clip and it appears that it's one of those push-pin clips that go into the evap/heater core airbox.

I have no idea how to locate the part number for this clip and no idea what that big connector services, which might help if I did. Would you be able to give me a hand in locating this thing so I can secure this wiring harness?

Here are some reference pictures.

This is the connector in question. There are no part numbers, bar codes, or markings on it.



This is the back side of it what would go up against the airbox. You can see the groove where the retaining clip would slide into.



These are the two holes on the airbox where I think the push-in retainer goes...they're right next to the heater blend door module:



And here's an image of the connector properly mounted, courtesy of another user. You can't see the mounting method, but you can see one of those holes in the airbox is unused. Judging from this picture, that clip is not going to be bundled with the wires and isn't part of the actual wiring harness.

I know what you need but its not shown and most likely serviced with the connector if even a pigtail of that is available.

You should be able to locate something online , I did a quick search and came up with this http://uk.rs-online.com/web/p/automotive-connector-accessories/8961717/


-Benny