2011-2014 Mustang GT 80mm TB How-to

Thanks.... I will do the negative side then

Guess what came up in the mail today... It's time to upgrade the air intake before the turbo gets done!

That great.. mine also came in today just waiting for my adapter to come in next

Lbj said:

That great.. mine also came in today just waiting for my adapter to come in next

Click to expand...

Looks like we are on the same route I just tested mine and it's working so far... However, After plugging back my V6 TB the car acted up... Maybe it needs to relearn the mix air/fuel.:shrug: I'll take the car tonight for a spin

[MENTION=13413]whatdoyoufeedit?[/MENTION] What size is your breather? 9mm, 12mm, or 25mm? I'm about to remove my vacuum line too with that TB mod lol.

For the intake breather, you need a 5/8" 15mm ID

Something like this = www.jegs.com/i/Vibrant-Performance/231/2166/10002/-1

Lucky for LBJ, we have local JEGS stores, if he goes the breather route.

StangAtx Let us know what happened After you go on a drive

Lbj said:

StangAtx Let us know what happened After you bo on a drive

Click to expand...

I just finished ordering everything. Additional gasket, air intake kit, TB adapter from Zac, breather, screws, and some plumbing to clog the vac line. :headbonk: I guess it's still better than $400+ lol

I should get everything by next week or the following week. The one that's gonna block me is the adapter. It'll arrive later than my other stuff.

Lbj said:

http://www.mustang6g.com/forums/picture.php?albumid=17

Click to expand...

It seems that the link is broken. I can't see it.

I know you can look at the Throttlebody I got in my album the butterfly is open a little bit hopefully that ok

Lbj said:

I know you can look at the Throttlebody I got in my album the butterflie is open a little bit hopefully that ok

Click to expand...

Mine has a little gap too. I believe it's normal. If I'm not wrong it's to allow air to pass a little bit to start the car... Please, someone correct me if I'm wrong :shrug:

StangATX said:

Mine has a little gap too. I believe it's normal. If I'm not wrong it's to allow air to pass a little bit to start the car... Please, someone correct me if I'm wrong :shrug:

Click to expand...

Normal

Could someone maybe help me find a 2011-2014 TB for cheap? I've checked ebay and i can't find any no where near the price yall pay lol

http://m.ebay.com/itm/Factory-OEM-F...3D272499351801&_trksid=p2056116.c100408.m2460. This is the one I have

$63
Http://m.ebay.com/itm/R4030-THROTTLE-BODY-2011-FORD-F150-5-0-/182521075971?nav=SEARCH

$63
Http://m.ebay.com/itm/25R019-THROTTLE-BODY-2013-FORD-F150-5-0-/131762719745?nav=SEARCH

$63.11
Http://m.ebay.com/itm/2012-Ford-Mustang-5-0L-Throttle-Body-Assembly-81K-OEM-/361950430386?nav=SEARCH

$65 OBO
Http://m.ebay.com/itm/2011-2014-FORD-F-150-5-0L-THROTTLE-BODY-OEM-/252513243218?nav=SEARCH