F-150 Manifold Testing/Journey

WildHorse said:

My comment was indeed in fact about runner length. Shorter runners don't necessarily mean higher horsepower.

Click to expand...

I didn't say that or even hinted at that.. Rule of thumb SINGLE plane for high RPM 6500- up

Because a few have ask. Here is the opening for the Ford CX-2420 MAP sensor on the back of the F150 mani. You could purchase the sensor if not already on the mani or just tap it and put a plug in it. I want to say its 3/8.

Wow someone got this manifold for $63 bucks I can only find brand new ones for $300ish.

jcart953 said:

Wow someone got this manifold for $63 bucks I can only find brand new ones for $300ish.

Click to expand...

Keep an eye on ebay, or call Athens Autosport in Georgia. Or if you know of a Ford dealer that supercharges F150 Trucks.

Yup 63.74 with free shipping new take off , never been run or have gas in the fuel line it smells brand new lol

guess I got lucky on eBay lol

I give pay you $75 for it . You can make a profit lol

Lol

10+ left...

sooooooo

http://www.ebay.com/itm/15-16-17-Fo...ash=item212a6ce0e7:g:QZYAAOSwYS9ZaR5r&vxp=mtr

MasterCylinder said:

10+ left...

sooooooo

http://www.ebay.com/itm/15-16-17-Fo...ash=item212a6ce0e7:g:QZYAAOSwYS9ZaR5r&vxp=mtr

Click to expand...

Thank you I just purchased one lol. If it sucks I'll just used that sucker as a paper weight.

So what exactly is needed for the swap (besides the eBay mani)? How difficult and does it need tuning? Any how-tos out there?

Boggus said:

So what exactly is needed for the swap (besides the eBay mani)? How difficult and does it need tuning? Any how-tos out there?

Click to expand...

See post #1 and 63. From what the op stated it seems you need to either plug the back of the manifold or buy a sensor (post 63). All else seems to be straight up swap but I'll let op verify.

It does seem like the guys over on the F150s sites have already been swapping to the mustang manifolds. See results below:


Original thread can be found below . Just replace the tvt with svt lol

https://www.tvtperformance.com/forums/threads/coyote-f-150-intake-test.1110961/

MasterCylinder said:

10+ left...

sooooooo

http://www.ebay.com/itm/15-16-17-Fo...ash=item212a6ce0e7:g:QZYAAOSwYS9ZaR5r&vxp=mtr

Click to expand...

Purchased aswell cant refuse that price if I dont like it oh well put the stocker back on.

Boggus said:

So what exactly is needed for the swap (besides the eBay mani)? How difficult and does it need tuning? Any how-tos out there?

Click to expand...

Its pretty easy, much like any other mani install. There a couple vacuum lines you have to move Around.

Is there a difference between a 2014 F150 manifold and a 2016 manifold?
I'm guessing so as the 2014 manifold costs $111, and the 2016 costs $321.

Any details on the differences?