Boost Works 1200hp entry level twin turbo kit? Starting around $6k!

Travis@boostworks · Oct 11, 2017

Guys are chomping at the bit for the full picture installation PDF. I'm working on it still! It's a ton of work to do it right.

tjf37 · Oct 13, 2017

PM sent with questions. Thanks!

jcart953 · Oct 13, 2017

Travis@boostworks said:
Guys are chomping at the bit for the full picture installation PDF. I'm working on it still! It's a ton of work to do it right.

I'd be interested in seeing that when its ready

3beeps · Oct 17, 2017

Things are underway! Installer decided to pull the motor since he already had to take the trans and headers off. Doing OPG/CG and mocking up the kit before putting the motor back in. Should be back in later this afternoon!

1200 miles and 1 month and the motor is out of the car lol.

Travis@boostworks · Oct 17, 2017

Well, might as well build the engine now. ;)

3beeps · Oct 17, 2017

Gotta crawl before I walk lol. I'll have to get used to it on wastegate boost, then turned up to ~10 psi, then E85.

[MENTION=10789]Travis@boostworks[/MENTION] - Which wastegate spring should I use assuming I'll be starting on pump gas and moving to E85 a few weeks later? I assume no more than ~13-14 psi on E85. I have an electronic boost controller so I think I'm gonna use the 7 PSI spring, if that exists. Haven't looked at what I've got yet lol.

turbojay · Oct 17, 2017

I hope to have 2000 miles on my 17 before the turbos go on in a month or so. I’m at 1500 with two weeks left to drive it.

pro 5.0 · Oct 17, 2017

blaket0w said:
Gotta crawl before I walk lol. I'll have to get used to it on wastegate boost, then turned up to ~10 psi, then E85.

[MENTION=10789]Travis@boostworks[/MENTION] - Which wastegate spring should I use assuming I'll be starting on pump gas and moving to E85 a few weeks later? I assume no more than ~13-14 psi on E85. I have an electronic boost controller so I think I'm gonna use the 7 PSI spring, if that exists. Haven't looked at what I've got yet lol.

Make HP then learn how to manage it

zx2reme · Oct 18, 2017

Hi Travis. PM sent.

Josh_TypeX · Oct 23, 2017

[MENTION=10789]Travis@boostworks[/MENTION] expressing interest in a RHD compatible kit. Please make this happen.

Burkey · Oct 23, 2017

Josh_TypeX said:
[MENTION=10789]Travis@boostworks[/MENTION] expressing interest in a RHD compatible kit. Please make this happen.

Travis, did you receive the pics I sent via email?

Travis@boostworks · Oct 24, 2017

Yessir!

We're gearing up for the Texas Mile this week, so we'll be out of the office. But, I'll get with you next week when we return.

Burkey · Oct 24, 2017

Travis@boostworks said:
Yessir!

We're gearing up for the Texas Mile this week, so we'll be out of the office. But, I'll get with you next week when we return.

Sweet. My next question is this -
[MENTION=22068]Josh_TypeX[/MENTION] will be heading to the US next week. Would you like him to take some RHD manifolds with him or is too soon? (He will be doing another trip not long afterwards)

3beeps · Oct 24, 2017

Travis@boostworks said:
Yessir!

We're gearing up for the Texas Mile this week, so we'll be out of the office. But, I'll get with you next week when we return.

Were you able to get my package out before leaving for a week?

Travis@boostworks · Oct 24, 2017

Burkey said:
Sweet. My next question is this -
[MENTION=22068]Josh_TypeX[/MENTION] will be heading to the US next week. Would you like him to take some RHD manifolds with him or is too soon? (He will be doing another trip not long afterwards)

Yes please!

Boost Works 1200hp entry level twin turbo kit? Starting around $6k!

Travis@boostworks

Well-Known Member

tjf37

Well-Known Member

jcart953

Well-Known Member

3beeps

Well-Known Member

Travis@boostworks

Well-Known Member

3beeps

Well-Known Member

turbojay

Well-Known Member

pro 5.0

Well-Known Member

zx2reme

Well-Known Member

Josh_TypeX

Well-Known Member

Burkey

Well-Known Member

Travis@boostworks

Well-Known Member

Burkey

Well-Known Member

3beeps

Well-Known Member

Travis@boostworks

Well-Known Member