What did you do to your GT350 today?

[edunn14]

I think that might be the Ford Performance (real) carbon fibre shift knob ?

I don’t know if they do them for the 350, but maybe the thread was adapted if they don’t ?

WD

It does appear that way, good eye! Part number matches too. It had an adapter on the shaft and a washer to stop it from going down too far.

Interesting that a real carbon fiber Ford Performance part felt so . . . Cheap and plasticky.

In unrelated news I have a Ford Performance shift knob if anyone wants one!

Sponsored

 

[NPTR]

Have to agree with this concern. I replaced my oil plug thinking I was upgrading and ended up blasting it out of the oil pan (despite being safety wired) and requiring a new oil pan. Expensive lesson - stick with OEM or similar plastic. Aftermarket metal expands at a different rate under heat than the plastic and the higher weight under vibration ends up causing problems.

OK this is good to know - unfortunately learning this a bit too late…question now is, do I gamble and leave it until the next oil change, or leave it and swap back on the next change…TBD. Not tracking, but will have to think about this. Thanks for flagging

 

[526 HRSE]

Beautiful day here so my fellow GT350 buddy and I took a drive to meet another friend from out of town for lunch. Great time and a nice drive. Weather was perfect.

Yours is one of the only gt350's that looks good with something other than black wheels.

 

[ChipG]

OK this is good to know - unfortunately learning this a bit too late…question now is, do I gamble and leave it until the next oil change, or leave it and swap back on the next change…TBD. Not tracking, but will have to think about this. Thanks for flagging

If you aren't tracking or driving hard it may be fine to just swap back at the next oil change, but it's a gamble you'll have to determine for yourself.

 

[SL8888]

What lug nuts did you use?

What lug nuts did you use?

 

[SL8888]

I gave my nephew a day of quality time, assisting him with getting his new to him GT-350 ready for some HPDE at Mid-Ohio. We installed a front tow hook, passenger side oil separator, changed the oil & filter, installed jacking rails, and bled the brakes. He learned a lot and is going to get ahold of Jon to procure his own oil change goodies as mine worked flawlessly again...
BTW, WD Pro. Just not sure bout the color of my nephews GT-350, just needs something, don't ya think...

 

[sox3]

Yours is one of the only gt350's that looks good with something other than black wheels.

Thank you for the kind words. They do make a big difference.

 

[One_350]

At a Shelby cars and coffee this morning, lots of beautiful 350 there

 

[sox3]

At a Shelby cars and coffee this morning, lots of beautiful 350 there

3 of us drove up from Delaware. Really nice place for a meet up. Lot of nice cars.

 

[TonyNJ]

Custom seat belts in the R...

 

[Postal Bob]

Added the "Shelby" windows graphic, courtesy of BigWormGraphix.com https://bigwormgraphix.com/2005-202...CcuyVhCdNDd807VHZTYnEAGksjqyGASI96Eu0tfil3W4s and their giveaway a few months back.

 

[CharlesC]

At a Shelby cars and coffee this morning, lots of beautiful 350 there

Thank you for confirming the fact I need bronze wheels.

 

[One_350]

3 of us drove up from Delaware. Really nice place for a meet up. Lot of nice cars.

Beautiful cars for sure, wish I could have put a face to a lot of gt350 owners but it was a lot of people there.

 

[sox3]

Yes there was. Maybe we will get to meet up at future event or car show.

 

[galaxy]

Thank you for confirming the fact I need bronze wheels.

Yours is one of the only gt350's that looks good with something other than black wheels.

The time of the black wheel is over; it is time for them to leave middle earth. The time of some other color is upon us.

Sponsored