Jeff_oddo
Well-Known Member
- Joined
- Apr 23, 2015
- Threads
- 69
- Messages
- 1,072
- Reaction score
- 129
- Location
- Colorado Springs, CO
- First Name
- Jeff
- Vehicle(s)
- Mustang GT Premium
Great, thank you!
Sponsored
Love the ride bro!! Thinking about wrapping my roof did you do yours yourself any advice?:ford:Fantastic thread. What about these, can these be verified from another thread:
Love the ride bro!! Thinking about wrapping my roof did you do yours yourself any advice?:ford:
I was told 22 ft lbs.... I just asked that question a few posts above.Does the rear shock upper bolt have a torque spec?
That holds the upper mount to the shock body.
Thanks
Doh. Sorry I missed it.I was told 22 ft lbs.... I just asked that question a few posts above.
Added to the list!Ahh that makes sense now, that's the shock absorber rod nut. Torque it to 22 lb ft.
Thanks so much for the spark plugs. I freaked out a sec because I thought it was foot pounds. It says inch pounds. :cheers:Not suspension, but more torque numbers that I got from the Ford service manual when doing my OPG/TS install.
RH/LH valve cover bolts: 89 in-lb
Battery heat shield fasteners: 80 in-lb
Cowl extension fasteners: 26 ft-lb
Strut tower nuts: 41 ft-lb
Front cover to block bolts: 18 ft-lb, then 60 degrees
Front cover to oil pan bolts: 89 in-lb, then 45 degrees
Wiring harness retainer nut (attached to oil pan): 71 in-lb
Alternator nut and bolt: 35 ft-lb
Accessory drive belt tensioner bolt: 35 ft-lb
Wire ground nut (front cover): 89 in-lb
Coolant pump bolts: 177 in-lbs, then 60 degrees
Coolant pump pulley bolts: 18 ft-lb
Thermostat housing bolts: 89 in-lb
Oil filter: 44 in-lb, then 180 degrees
Underbody shield bolts: center bolts = 97 in-lb, outer bolts = 18 in-lb
Subframe bracket with underbody shield: 46 ft-lb, oil filter flap = 18 in-lb
Oil pump bolt A (left): 89 in-lb, then 45 degrees
Oil pump stud bolt B (left middle): 18 ft-lb, then 75 degrees
Oil pump bolt C (right middle): 89 in-lb, then 45 degrees
Oil pump stud bolt D (right): 177 in-lb, then 60 degrees
RH/LH timing chain guide bolt: 89 in-lb
RH/LH primary timing chain tensioner bolts: 89 in-lb
Coolant degas bottle: 80 in-lb
Radiator upper support bracket bolts: 97 in-lb
Transmission fluid cooler (if equipped): 53 in-lb
Cooling fan bolts: 53 in-lb
Coolant pump heater outlet tube bolt: 89 in-lb
Spark plugs: 133 in-lb
Ignition coil-on-plug bolts: 62 in-lb, then 45 degrees
Air intake bolt: 71 in-lb
Air intake clamps: 48 in-lb
Glad to have provided them! Yeah, definitely stick with in-lbs on the spark plugs, haha.Thanks so much for the spark plugs. I freaked out a sec because I thought it was foot pounds. It says inch pounds. :cheers:
129ft-lbsDoes anyone know what the torque specs are for the blue rear subframe bolts? Thanks.
Thank you, just noticed they had a different name above.129ft-lbs